[Tue Jan 17 19:31:51 2012] Detection parameters:
  Position = (301.3, 500.7) = 3 32 28.38 -27 35 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.7 +/- 20.7
  Background counts = 131.0
  Rate = 0.002 +/- 0.0002

[Tue Jan 17 19:31:53 2012] Off-axis axis estimate = 14.67'
[Tue Jan 17 21:26:31 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:26:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 21:26:31 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Tue Jan 17 21:26:31 2012] source mask rpix=3.2, npix_max = 53, mask sum = 42, frac = 0.782
[Tue Jan 17 21:26:31 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.76"
[Tue Jan 17 22:08:46 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jan 17 22:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src21.csv
[Tue Jan 17 22:08:46 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jan 17 22:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src21.csv
[Tue Jan 17 22:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:08:47 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jan 17 22:08:47 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jan 17 22:08:47 2012] Fit fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Jan 17 22:09:03 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.764937 pixels away
[Tue Jan 17 22:09:03 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:09:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:09:03 2012] Assessing source extent using major
[Tue Jan 17 22:09:03 2012] Source does appear to be extended
[Tue Jan 17 22:09:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:38:35 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:38:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 23:38:35 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Tue Jan 17 23:38:35 2012] source mask rpix=3.2, npix_max = 53, mask sum = 42, frac = 0.782
[Tue Jan 17 23:38:35 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 13.76"
[Wed Jan 18 00:18:54 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src21.ximg exists
[Wed Jan 18 00:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src21.csv
[Wed Jan 18 00:18:54 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Jan 18 00:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src21.csv
[Wed Jan 18 00:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:18:55 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Jan 18 00:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Wed Jan 18 00:18:55 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Jan 18 00:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Wed Jan 18 00:18:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:19:07 2012] Spatial fit model total counts = 553.665000, observed total counts = 676.000000
[Wed Jan 18 00:19:07 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jan 18 00:19:07 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:19:07 2012] Assessing source extent using major
[Wed Jan 18 00:19:07 2012] Source does appear to be extended
[Wed Jan 18 00:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 03:00:23 2012] XMMSAS src. selection expression = ellipse(26164.660004, 43512.536469, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 18 03:00:23 2012] Writing source region out to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src10_src.reg
[Wed Jan 18 03:00:23 2012] Extracting stamp from image fullrun_mos2_xmm0604960701_pi300-10000_cl_sm2.00.img.gz, (264, 463) - (339, 538)
[Wed Jan 18 03:00:23 2012] XMMSAS bgd. selection expression = annulus(26164.660004, 43512.536469, 1087.500000, 2175.000000, X, Y)
[Wed Jan 18 03:00:23 2012] Writing fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src10.gif
[Wed Jan 18 03:05:36 2012] Mean detx,y = (8215.41, 14381.56) 
[Wed Jan 18 03:05:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 03:05:48 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 03:05:48 2012] Setting source spectrum file to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jan 18 03:05:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jan 18 03:20:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 18 03:20:27 2012] rmf not generated due to insufficient counts
[Wed Jan 18 03:30:36 2012] Updating aperture counts using extracted products
[Wed Jan 18 03:30:36 2012] Error reading totcts from fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jan 18 03:30:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 03:30:37 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src10.arf
[Wed Jan 18 03:30:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 03:30:37 2012] Updating source flux to 9.4e-14
[Wed Jan 18 03:32:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting