[Tue Jan 17 19:31:49 2012] Detection parameters:
  Position = (450.7, 410.2) = 3 31 39.46 -27 42 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.1 +/- 20.7
  Background counts = 173.8
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 19:31:50 2012] Off-axis axis estimate = 13.69'
[Tue Jan 17 20:57:49 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 20:57:49 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Tue Jan 17 20:57:49 2012] source mask rpix=3.1, npix_max = 50, mask sum = 31, frac = 0.614
[Tue Jan 17 20:57:49 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.28"
[Tue Jan 17 21:26:30 2012] fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_src18.ximg exists
[Tue Jan 17 21:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_src18.csv
[Tue Jan 17 21:26:30 2012] fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Jan 17 21:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_src18.csv
[Tue Jan 17 21:26:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 21:26:31 2012] fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Jan 17 21:26:31 2012] fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Jan 17 21:26:31 2012] Fit fullrun_mos1_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Jan 17 22:08:59 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.163603 pixels away
[Tue Jan 17 22:08:59 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:08:59 2012] Assessing source extent using major
[Tue Jan 17 22:08:59 2012] Source does appear to be extended
[Tue Jan 17 22:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:09:02 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:09:02 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Tue Jan 17 23:09:02 2012] source mask rpix=3.1, npix_max = 50, mask sum = 31, frac = 0.614
[Tue Jan 17 23:09:02 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 13.28"
[Tue Jan 17 23:38:35 2012] fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_src17.ximg exists
[Tue Jan 17 23:38:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_src17.csv
[Tue Jan 17 23:38:35 2012] fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Jan 17 23:38:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_src17.csv
[Tue Jan 17 23:38:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 23:38:35 2012] fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Jan 17 23:38:35 2012] fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Jan 17 23:38:35 2012] Fit fullrun_mos1_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Jan 18 00:19:03 2012] Spatial fit model total counts = 651.986000, observed total counts = 661.000000
[Wed Jan 18 00:19:03 2012] Offset between fit and detection position for source 5 = 5.801048 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 5.801048 pixels
  Position = (454.5, 405.9) = 3 31 38.21 -27 42 33.3
  Extent = 18.7 (17.4-20.1)", rotation angle = 0
  Source counts = 627.4 +/- 25.0
  Background counts = 0.0
  Rate = 0.006 +/- 0.0002
[Wed Jan 18 00:19:03 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:19:03 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:19:03 2012] Source does appear to be extended
[Wed Jan 18 00:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 02:27:15 2012] XMMSAS src. selection expression = ellipse(39490.440000, 35261.972000, 1121.296953, 1121.296953, 0.000000, X, Y)
[Wed Jan 18 02:27:15 2012] Writing source region out to fullrun_mos1_xmm0604960701_pi300-10000_pass1_cl_src5_src.reg
[Wed Jan 18 02:27:15 2012] Extracting stamp from image fullrun_mos1_xmm0604960701_pi300-10000_cl_sm2.00.img.gz, (390, 341) - (519, 470)
[Wed Jan 18 02:27:15 2012] XMMSAS bgd. selection expression = annulus(39490.440000, 35261.972000, 1868.828255, 3737.656509, X, Y)
[Wed Jan 18 02:27:15 2012] Writing fullrun_mos1_xmm0604960701_pi300-10000_pass1_cl_src5.gif
[Wed Jan 18 02:33:13 2012] Mean detx,y = (12506.78, 7290.79) 
[Wed Jan 18 02:33:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 02:33:42 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 02:33:42 2012] Setting source spectrum file to fullrun_mos1_xmm0604960701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan 18 02:33:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604960701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jan 18 03:30:35 2012] Updating aperture counts using extracted products
[Wed Jan 18 03:30:35 2012] Error reading totcts from fullrun_mos1_xmm0604960701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan 18 03:30:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 03:30:35 2012] Using photon index=1.80, rate=0.00608, arf fullrun_mos1_xmm0604960701_pi300-10000_pass1_cl_src5.arf
[Wed Jan 18 03:30:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 03:30:35 2012] Updating source flux to 1.3e-13