[Tue Jan 17 10:34:05 2012] Detection parameters:
  Position = (183.5, 191.9) = 3 33 9.22 -27 58 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.7 +/- 27.3
  Background counts = 225.3
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 10:34:05 2012] Off-axis axis estimate = 11.36'
[Tue Jan 17 10:41:38 2012] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 10:41:38 2012] Initial guess for spatial extent in simple fitting = 12.11"
[Tue Jan 17 10:41:38 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.974
[Tue Jan 17 10:41:38 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 12.11"
[Tue Jan 17 12:51:01 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src57.ximg exists
[Tue Jan 17 12:51:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src57.csv
[Tue Jan 17 12:51:01 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src57_1.ximg exists
[Tue Jan 17 12:51:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src57.csv
[Tue Jan 17 12:51:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 12:51:02 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Tue Jan 17 12:51:02 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Tue Jan 17 12:51:02 2012] Fit fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Tue Jan 17 14:50:13 2012] Source 60 is offset by -8.024874 and 0.414782 pixels which is larger than
2 X fitted extent = 1.251025 x 1.251025, not incorporating fit results
[Tue Jan 17 14:50:13 2012] Warning, spatial fit 57 centroid is now closest to src. 59
[Tue Jan 17 14:50:13 2012] Spatial fit model total counts = 2939.350000, observed total counts = 2933.000000
[Tue Jan 17 14:50:13 2012] Offset between fit and detection position for source 60 = 3.751224 pixels
[Tue Jan 17 14:50:13 2012] Warning, changing simple spatial fit ID from 57 to 58
[Tue Jan 17 14:50:13 2012] 2945.250000 total counts/ 1725.450000 bgd. counts: snr = 29.365503
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 3.751224 pixels
  Position = (182.1, 195.4) = 3 33 9.66 -27 58 16.1
  Extent = 24.0 (24.0-24.0)", rotation angle = 0
  Source counts = 1219.8 +/- 54.3
  Background counts = 1725.5
  Rate = 0.01 +/- 0.0006
[Tue Jan 17 14:50:13 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 14:50:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 14:50:13 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 14:50:13 2012] Source does appear to be extended
[Tue Jan 17 14:50:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:50:13 2012] Source is confused with source 61
[Tue Jan 17 14:50:13 2012] Source is confused with source 62
[Tue Jan 17 14:50:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:50:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 14:50:46 2012] Initial guess for spatial extent in simple fitting = 24.02"
[Tue Jan 17 14:50:46 2012] source mask rpix=5.5, npix_max = 145, mask sum = 138, frac = 0.952
[Tue Jan 17 14:50:46 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 24.02"
[Tue Jan 17 17:31:42 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src54.ximg exists
[Tue Jan 17 17:31:42 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Jan 17 17:31:42 2012] Fit fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src54 appears to have run properly
[Tue Jan 17 17:31:43 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Jan 17 17:31:43 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Jan 17 17:31:43 2012] Fit fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Tue Jan 17 19:08:08 2012] Warning, spatial fit 54 centroid is now closest to src. 51
[Tue Jan 17 19:08:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 19:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 19:08:08 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 19:08:08 2012] Source does appear to be extended
[Tue Jan 17 19:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:08:35 2012] Counts = 1219.800000, rescaling region sizes by 2.000000
[Tue Jan 17 19:08:35 2012] XMMSAS src. selection expression = ellipse(15797.572000, 16954.016000, 2881.968083, 2881.968083, 0.000000, X, Y)
[Tue Jan 17 19:08:35 2012] Writing source region out to fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src60_src.reg
[Tue Jan 17 19:08:35 2012] Extracting stamp from image fullrun_pn_xmm0604960601_pi300-10000_cl_sm2.00.img.gz, (17, 30) - (348, 361)
[Tue Jan 17 19:08:35 2012] XMMSAS bgd. selection expression = annulus(15797.572000, 16954.016000, 9606.560276, 19213.120553, X, Y) && !ellipse(32005.764282, 29819.560059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16325.928558, 25098.349792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18739.103271, 16370.133469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27068.501007, 36706.241425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.552000, 35873.746000, 1388.456040, 1388.456040, 0.000000, X, Y) && !ellipse(30792.142426, 35670.182617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21566.795600, 35798.788200, 400.014412, 400.014412, 0.000000, X, Y) && !ellipse(31467.725400, 35091.562600, 359.466410, 359.466410, 0.000000, X, Y) && !ellipse(34230.939026, 34848.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18587.605972, 34468.826996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11283.777023, 34142.919495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26423.197200, 33790.093780, 1550.928045, 1550.928045, 0.000000, X, Y) && !ellipse(10686.447868, 32801.027863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26264.599000, 32639.402000, 901.856026, 901.856026, 0.000000, X, Y) && !ellipse(26296.185640, 32285.973800, 422.578412, 422.578412, 0.000000, X, Y) && !ellipse(24021.560181, 12768.557022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33305.894958, 31618.029114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33899.883000, 30737.081000, 421.395212, 421.395212, 0.000000, X, Y) && !ellipse(18400.401560, 29504.743800, 426.733612, 426.733612, 0.000000, X, Y) && !ellipse(12770.989029, 29351.720001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27155.562400, 13146.977800, 435.661613, 435.661613, 0.000000, X, Y) && !ellipse(12877.089310, 27895.040833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22783.034400, 27783.140800, 435.813613, 435.813613, 0.000000, X, Y) && !ellipse(9620.490000, 27876.044600, 550.209616, 550.209616, 0.000000, X, Y) && !ellipse(34759.860687, 26006.098999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.412200, 24628.395000, 391.870411, 391.870411, 0.000000, X, Y) && !ellipse(24214.331238, 24184.918823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20947.322000, 23417.758600, 362.429610, 362.429610, 0.000000, X, Y) && !ellipse(9863.046951, 21860.742020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17537.515335, 15647.538040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18154.425780, 20453.067400, 455.640813, 455.640813, 0.000000, X, Y) && !ellipse(15014.449400, 19829.504000, 362.566410, 362.566410, 0.000000, X, Y) && !ellipse(10555.407570, 19509.833054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23958.143640, 18440.213800, 417.849612, 417.849612, 0.000000, X, Y) && !ellipse(23094.301758, 18418.882200, 460.866413, 304.699209, 213.306000, X, Y) && !ellipse(18206.934509, 17478.529877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15521.677704, 17461.338562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15277.189331, 16636.293518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28852.606400, 12145.236400, 580.746417, 346.097610, -0.000000, X, Y)
[Tue Jan 17 19:08:35 2012] Writing fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src60.gif
[Tue Jan 17 20:10:53 2012] Mean detx,y = (-6474.43, 12924.97) 
[Tue Jan 17 20:11:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 20:16:57 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 20:16:57 2012] Setting source spectrum file to fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue Jan 17 20:16:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Tue Jan 17 22:51:43 2012] Updating aperture counts using extracted products
[Tue Jan 17 22:51:43 2012] Error reading totcts from fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue Jan 17 22:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:51:45 2012] Using photon index=1.80, rate=0.0127, arf fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src60.arf
[Tue Jan 17 22:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 22:51:45 2012] Updating source flux to 7.4e-14
[Tue Jan 17 22:54:40 2012] Flag b found in src. 60 procflags, skipping spectral fitting
[Tue Jan 17 22:54:40 2012] Flag c found in src. 60 procflags, skipping spectral fitting