[Tue Jan 17 10:34:01 2012] Detection parameters:
  Position = (312.3, 432.2) = 3 32 26.94 -27 41 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3620.4 +/- 76.0
  Background counts = 246.3
  Rate = 0.03 +/- 0.0006

[Tue Jan 17 10:34:05 2012] Off-axis axis estimate = 9.75'
[Tue Jan 17 10:41:38 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 10:41:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 10:41:38 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Tue Jan 17 10:41:38 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Tue Jan 17 10:41:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.30"
[Tue Jan 17 12:51:00 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan 17 12:51:00 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan 17 12:51:00 2012] Fit fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jan 17 12:51:01 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 12:51:01 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 12:51:01 2012] Fit fullrun_pn_xmm0604960601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 14:50:12 2012] Warning, spatial fit 1 centroid is now closest to src. 11
[Tue Jan 17 14:50:13 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 14:50:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 14:50:13 2012] Assessing source extent using major
[Tue Jan 17 14:50:13 2012] Source does appear to be extended
[Tue Jan 17 14:50:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:50:13 2012] Source is confused with source 11
[Tue Jan 17 14:50:13 2012] Source is confused with source 13
[Tue Jan 17 14:50:46 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:50:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 14:50:46 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Tue Jan 17 14:50:46 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Tue Jan 17 14:50:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.30"
[Tue Jan 17 17:31:42 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 17 17:31:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 17:31:42 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 17 17:31:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 17:31:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:31:42 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 17:31:42 2012] fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 17:31:42 2012] Fit fullrun_pn_xmm0604960601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 19:08:08 2012] Warning, spatial fit 1 centroid is now closest to src. 11
[Tue Jan 17 19:08:08 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.670368 pixels away
[Tue Jan 17 19:08:08 2012] Spatial fit model total counts = 2109.090000, observed total counts = 2114.000000
[Tue Jan 17 19:08:08 2012] Offset between fit and detection position for source 2 = 1.504648 pixels
[Tue Jan 17 19:08:08 2012] Warning, changing simple spatial fit ID from 1 to 12
[Tue Jan 17 19:08:08 2012] 1845.094000 total counts/ 1628.990000 bgd. counts: snr = 5.354311
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.504648 pixels
  Position = (311.1, 433.1) = 3 32 27.33 -27 41 2.7
  Extent = 11.1 (8.6-13.6)", rotation angle = 0
  Source counts = 216.1 +/- 43.0
  Background counts = 1629.0
  Rate = 0.002 +/- 0.0004
[Tue Jan 17 19:08:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 19:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 19:08:08 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 19:08:08 2012] Source does appear to be extended
[Tue Jan 17 19:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:08:34 2012] XMMSAS src. selection expression = ellipse(27014.710400, 37628.524000, 664.854019, 664.854019, 0.000000, X, Y)
[Tue Jan 17 19:08:34 2012] Writing source region out to fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2_src.reg
[Tue Jan 17 19:08:34 2012] Extracting stamp from image fullrun_pn_xmm0604960601_pi300-10000_cl_sm2.00.img.gz, (273, 395) - (349, 471)
[Tue Jan 17 19:08:34 2012] XMMSAS bgd. selection expression = annulus(27014.710400, 37628.524000, 1108.090032, 2216.180064, X, Y) && !ellipse(24181.007965, 39178.325928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.342407, 38146.512512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27068.501007, 36706.241425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.552000, 35873.746000, 1388.456040, 1388.456040, 0.000000, X, Y)
[Tue Jan 17 19:08:34 2012] Writing fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2.gif
[Tue Jan 17 19:13:00 2012] Mean detx,y = (-4761.61, -9693.85) 
[Tue Jan 17 19:13:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 19:13:18 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 19:13:18 2012] Setting source spectrum file to fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 19:13:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jan 17 22:51:42 2012] Updating aperture counts using extracted products
[Tue Jan 17 22:51:42 2012] Error reading totcts from fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 22:51:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:51:44 2012] Using photon index=1.80, rate=0.00224, arf fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2.arf
[Tue Jan 17 22:51:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 22:51:44 2012] Updating source flux to 1.1e-14
[Tue Jan 17 22:54:40 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Jan 17 22:57:42 2012] Reading fit data from xmm0604960601/analysis//spectral/fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jan 17 22:57:42 2012] Spectral fit parameter nH value = 5.26979e+13
[Tue Jan 17 22:57:42 2012] Spectral fit parameter PhoIndex value = 2.07023
[Tue Jan 17 22:57:42 2012] Failed to get F(0.3-8.0) from xmm0604960601/analysis//spectral/fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 22:57:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:57:42 2012] Using Nh = 5.3e+13, photon index=2.07, rate=0.00224, arf fullrun_pn_xmm0604960601_pi300-10000_pass1_cl_src2.arf
[Tue Jan 17 22:57:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 22:57:42 2012] Updating source flux to 9.3e-15