[Tue Jan 17 11:20:54 2012] Detection parameters:
  Position = (302.9, 365.4) = 3 32 29.94 -27 45 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 10.9
  Background counts = 18.8
  Rate = 0.002 +/- 0.0003

[Tue Jan 17 11:20:54 2012] Off-axis axis estimate = 4.86'
[Tue Jan 17 12:53:45 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:53:45 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Tue Jan 17 12:53:45 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Tue Jan 17 12:53:45 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.86"
[Tue Jan 17 13:30:27 2012] fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jan 17 13:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_src21.csv
[Tue Jan 17 13:30:27 2012] fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jan 17 13:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_src21.csv
[Tue Jan 17 13:30:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 13:30:28 2012] fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jan 17 13:30:28 2012] fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jan 17 13:30:28 2012] Fit fullrun_mos2_xmm0604960501_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Jan 17 13:30:45 2012] Source 15 is offset by -6.473697 and 6.848755 pixels which is larger than
2 X fitted extent = 1.028110 x 1.028110, not incorporating fit results
[Tue Jan 17 13:30:45 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:30:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:30:45 2012] Assessing source extent using major
[Tue Jan 17 13:30:45 2012] Source does appear to be extended
[Tue Jan 17 13:30:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 13:30:45 2012] Source is confused with source 14
[Tue Jan 17 14:53:47 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:53:47 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Tue Jan 17 14:53:47 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Tue Jan 17 14:53:47 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.86"
[Tue Jan 17 15:28:04 2012] fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jan 17 15:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_src21.csv
[Tue Jan 17 15:28:04 2012] fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jan 17 15:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_src21.csv
[Tue Jan 17 15:28:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:28:04 2012] fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jan 17 15:28:04 2012] fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jan 17 15:28:04 2012] Fit fullrun_mos2_xmm0604960501_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Jan 17 15:28:25 2012] Spatial fit model total counts = 297.546000, observed total counts = 294.000000
[Tue Jan 17 15:28:25 2012] Offset between fit and detection position for source 15 = 0.368505 pixels
[Tue Jan 17 15:28:25 2012] 301.959000 total counts/ 268.112000 bgd. counts: snr = 2.067103
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.368505 pixels
  Position = (302.6, 365.2) = 3 32 30.04 -27 45 28.8
  Extent = 4.6 (2.4-6.3)", rotation angle = 0
  Source counts = 33.8 +/- 17.4
  Background counts = 268.1
  Rate = 0.0007 +/- 0.0004
[Tue Jan 17 15:28:25 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:28:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:28:25 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 15:28:25 2012] Source does appear to be extended
[Tue Jan 17 15:28:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 16:48:56 2012] XMMSAS src. selection expression = ellipse(26278.347400, 31724.218200, 274.028408, 274.028408, 0.000000, X, Y)
[Tue Jan 17 16:48:56 2012] Writing source region out to fullrun_mos2_xmm0604960501_pi300-10000_pass1_cl_src15_src.reg
[Tue Jan 17 16:48:56 2012] Extracting stamp from image fullrun_mos2_xmm0604960501_pi300-10000_cl_sm2.00.img.gz, (287, 349) - (318, 381)
[Tue Jan 17 16:48:56 2012] XMMSAS bgd. selection expression = annulus(26278.347400, 31724.218200, 456.714013, 913.428026, X, Y) && !ellipse(26221.530760, 32183.024000, 264.630408, 264.630408, 0.000000, X, Y)
[Tue Jan 17 16:48:56 2012] Writing fullrun_mos2_xmm0604960501_pi300-10000_pass1_cl_src15.gif
[Tue Jan 17 16:54:04 2012] Mean detx,y = (3272.08, 3795.82) 
[Tue Jan 17 16:54:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 16:54:16 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 16:54:16 2012] Setting source spectrum file to fullrun_mos2_xmm0604960501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jan 17 16:54:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jan 17 16:56:02 2012] Not generating rmf since there are only 33 counts
[Tue Jan 17 16:56:02 2012] rmf not generated due to insufficient counts
[Tue Jan 17 16:57:25 2012] Updating aperture counts using extracted products
[Tue Jan 17 16:57:25 2012] Error reading totcts from fullrun_mos2_xmm0604960501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jan 17 16:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 16:57:26 2012] Using photon index=1.80, rate=0.000725, arf fullrun_mos2_xmm0604960501_pi300-10000_pass1_cl_src15.arf
[Tue Jan 17 16:57:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 16:57:26 2012] Updating source flux to 1.3e-14
[Tue Jan 17 16:57:56 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Tue Jan 17 16:57:56 2012] Flag c found in src. 15 procflags, skipping spectral fitting
[Tue Jan 17 16:57:56 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 16:57:57 2012] xmm0604960501/analysis//spectral/fullrun_mos2_xmm0604960501_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete