[Mon Jan 16 17:45:59 2012] Detection parameters:
  Position = (154.5, 244.1) = 3 33 20.58 -27 49 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218.7 +/- 27.7
  Background counts = 262.7
  Rate = 0.002 +/- 0.0002

[Mon Jan 16 17:45:59 2012] Off-axis axis estimate = 11.16'
[Mon Jan 16 17:52:20 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 17:52:20 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Mon Jan 16 17:52:20 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.988
[Mon Jan 16 17:52:20 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 12.01"
[Mon Jan 16 19:06:17 2012] fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_src46.ximg exists
[Mon Jan 16 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_src46.csv
[Mon Jan 16 19:06:17 2012] fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_src46_1.ximg exists
[Mon Jan 16 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_src46.csv
[Mon Jan 16 19:06:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 19:06:18 2012] fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Mon Jan 16 19:06:18 2012] fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Mon Jan 16 19:06:18 2012] Fit fullrun_pn_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Mon Jan 16 20:23:46 2012] Source 53 is offset by 6.543012 and 3.278364 pixels which is larger than
2 X fitted extent = 1.431081 x 1.431081, not incorporating fit results
[Mon Jan 16 20:23:46 2012] Spatial fit model total counts = 2213.790000, observed total counts = 2214.000000
[Mon Jan 16 20:23:46 2012] Offset between fit and detection position for source 53 = 7.198692 pixels
[Mon Jan 16 20:23:46 2012] 2331.050000 total counts/ 1242.500000 bgd. counts: snr = 30.881628
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 7.198692 pixels
  Position = (151.0, 237.8) = 3 33 21.71 -27 49 39.4
  Extent = 24.0 (24.0-48.0)", rotation angle = 0
  Source counts = 1088.5 +/- 48.3
  Background counts = 1242.5
  Rate = 0.009 +/- 0.0004
[Mon Jan 16 20:23:46 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 20:23:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 20:23:46 2012] Assessing source extent using major axis lower bound
[Mon Jan 16 20:23:46 2012] Source does appear to be extended
[Mon Jan 16 20:23:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 20:23:46 2012] Source is confused with source 52
[Mon Jan 16 20:24:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 16 20:24:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 16 20:24:13 2012] Initial guess for spatial extent in simple fitting = 24.01"
[Mon Jan 16 20:24:13 2012] source mask rpix=5.5, npix_max = 144, mask sum = 130, frac = 0.897
[Mon Jan 16 20:24:13 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 24.01"
[Mon Jan 16 21:39:30 2012] fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_src46.ximg exists
[Mon Jan 16 21:39:30 2012] fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon Jan 16 21:39:30 2012] Fit fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_src46 appears to have run properly
[Mon Jan 16 21:39:31 2012] fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon Jan 16 21:39:31 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Jan 16 21:39:31 2012] fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Jan 16 21:39:31 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Jan 16 21:39:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:56:06 2012] Warning, spatial fit 46 centroid is now closest to src. 17
[Mon Jan 16 22:56:06 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 22:56:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 22:56:06 2012] Assessing source extent using major axis lower bound
[Mon Jan 16 22:56:06 2012] Source does appear to be extended
[Mon Jan 16 22:56:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 22:56:32 2012] Counts = 1088.550000, rescaling region sizes by 2.000000
[Mon Jan 16 22:56:32 2012] XMMSAS src. selection expression = ellipse(13089.742000, 20643.032000, 2881.464083, 2881.464083, 0.000000, X, Y)
[Mon Jan 16 22:56:32 2012] Writing source region out to fullrun_pn_xmm0604960401_pi300-10000_pass1_cl_src53_src.reg
[Mon Jan 16 22:56:32 2012] Extracting stamp from image fullrun_pn_xmm0604960401_pi300-10000_cl_sm2.00.img.gz, (0, 72) - (317, 403)
[Mon Jan 16 22:56:32 2012] XMMSAS bgd. selection expression = annulus(13089.742000, 20643.032000, 9604.880276, 19209.760553, X, Y) && !ellipse(18417.030960, 10237.396790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32495.763214, 23154.961273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27621.673600, 30926.414000, 391.111211, 391.111211, 0.000000, X, Y) && !ellipse(13452.484604, 22835.040863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.473114, 11772.217453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24680.774750, 32370.923737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.853800, 37457.692000, 312.931209, 312.931209, 0.000000, X, Y) && !ellipse(25311.997345, 37913.501831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31740.686157, 35365.427734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32684.591919, 35186.044684, 661.967578, 362.764261, 44.428229, X, Y) && !ellipse(13259.075012, 33180.585541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30467.564600, 32863.281000, 326.797609, 326.797609, 0.000000, X, Y) && !ellipse(27953.388000, 30741.894000, 1988.752057, 1988.752057, 0.000000, X, Y) && !ellipse(22064.800680, 29185.860600, 409.844812, 409.844812, 0.000000, X, Y) && !ellipse(10163.914871, 21257.857880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16834.296310, 18479.150681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10382.169640, 15192.378200, 757.637622, 757.637622, 0.000000, X, Y) && !ellipse(15540.440000, 13179.800000, 350.985610, 350.985610, 0.000000, X, Y) && !ellipse(23607.917236, 11795.977310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15978.040880, 10899.676600, 436.384813, 436.384813, 0.000000, X, Y) && !ellipse(27407.561523, 38136.152588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18705.315369, 38294.291443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24073.566895, 37925.622040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27131.940277, 36715.146393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19069.079200, 36788.716200, 355.409610, 355.409610, 0.000000, X, Y) && !ellipse(25635.560400, 33245.457000, 623.984818, 623.984818, 0.000000, X, Y) && !ellipse(26916.170000, 29615.558000, 1329.552038, 1329.552038, 0.000000, X, Y) && !ellipse(22072.871400, 30064.916200, 395.920011, 395.920011, 0.000000, X, Y) && !ellipse(15280.264000, 29129.280000, 1795.808052, 1795.808052, 0.000000, X, Y) && !ellipse(31201.051800, 29033.439600, 799.081623, 799.081623, 0.000000, X, Y) && !ellipse(32037.505157, 28471.593719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19114.993800, 27839.329400, 381.270411, 381.270411, 0.000000, X, Y) && !ellipse(25061.929800, 27327.604600, 393.216011, 393.216011, 0.000000, X, Y) && !ellipse(31883.206140, 27126.511800, 353.155210, 353.155210, 0.000000, X, Y) && !ellipse(17907.121000, 25847.932000, 399.268811, 399.268811, 0.000000, X, Y) && !ellipse(26779.464800, 26124.340400, 451.093613, 451.093613, 0.000000, X, Y) && !ellipse(24388.771973, 24935.344269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12704.333191, 24672.491058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18906.610920, 22863.884600, 425.010412, 425.010412, 0.000000, X, Y) && !ellipse(16119.618179, 21798.320953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12214.464000, 21576.199000, 973.104028, 973.104028, 0.000000, X, Y) && !ellipse(23316.828200, 21149.574600, 352.104810, 352.104810, 0.000000, X, Y) && !ellipse(31062.673981, 18995.430420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24763.311300, 17586.012400, 447.013613, 447.013613, 0.000000, X, Y) && !ellipse(21430.681702, 16797.255997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18618.203857, 13852.860367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12754.717682, 13758.144852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16272.056686, 12788.052902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.321860, 6595.661000, 753.642422, 753.642422, 0.000000, X, Y)
[Mon Jan 16 22:56:32 2012] Writing fullrun_pn_xmm0604960401_pi300-10000_pass1_cl_src53.gif
[Tue Jan 17 00:05:12 2012] Mean detx,y = (7963.33, -8988.57) 
[Tue Jan 17 00:05:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 00:10:08 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 00:10:09 2012] Setting source spectrum file to fullrun_pn_xmm0604960401_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Jan 17 00:10:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960401_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Tue Jan 17 03:31:57 2012] Updating aperture counts using extracted products
[Tue Jan 17 03:31:57 2012] Error reading totcts from fullrun_pn_xmm0604960401_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Jan 17 03:31:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 03:31:58 2012] Using photon index=1.80, rate=0.0093, arf fullrun_pn_xmm0604960401_pi300-10000_pass1_cl_src53.arf
[Tue Jan 17 03:31:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 03:31:58 2012] Updating source flux to 3.7e-14
[Tue Jan 17 03:35:32 2012] Flag b found in src. 53 procflags, skipping spectral fitting
[Tue Jan 17 03:35:32 2012] Flag c found in src. 53 procflags, skipping spectral fitting