[Mon Jan 16 17:46:04 2012] Detection parameters:
  Position = (213.3, 474.8) = 3 33 1.23 -27 32 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.6 +/- 16.4
  Background counts = 67.5
  Rate = 0.0008 +/- 0.0001

[Mon Jan 16 17:46:04 2012] Off-axis axis estimate = 14.20'
[Mon Jan 16 19:37:35 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 19:37:35 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Mon Jan 16 19:37:35 2012] source mask rpix=3.1, npix_max = 52, mask sum = 46, frac = 0.882
[Mon Jan 16 19:37:35 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 13.53"
[Mon Jan 16 20:23:32 2012] fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_src39.ximg exists
[Mon Jan 16 20:23:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_src39.csv
[Mon Jan 16 20:23:32 2012] fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Jan 16 20:23:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_src39.csv
[Mon Jan 16 20:23:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 20:23:34 2012] fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Jan 16 20:23:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src39.csv
[Mon Jan 16 20:23:34 2012] fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Jan 16 20:23:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src39.csv
[Mon Jan 16 20:23:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960401_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 20:23:57 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 16.200593 pixels away
[Mon Jan 16 20:23:57 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 20:23:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 20:23:57 2012] Assessing source extent using major
[Mon Jan 16 20:23:57 2012] Source does appear to be extended
[Mon Jan 16 20:23:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 22:13:07 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 22:13:07 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Mon Jan 16 22:13:07 2012] source mask rpix=3.1, npix_max = 52, mask sum = 46, frac = 0.882
[Mon Jan 16 22:13:07 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 13.53"
[Mon Jan 16 22:55:55 2012] fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_src39.ximg exists
[Mon Jan 16 22:55:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_src39.csv
[Mon Jan 16 22:55:55 2012] fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon Jan 16 22:55:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_src39.csv
[Mon Jan 16 22:55:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:55:55 2012] fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon Jan 16 22:55:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon Jan 16 22:55:55 2012] fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon Jan 16 22:55:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon Jan 16 22:55:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960401_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:56:18 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 16.010159 pixels away
[Mon Jan 16 22:56:18 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 22:56:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 22:56:18 2012] Assessing source extent using major
[Mon Jan 16 22:56:18 2012] Source does appear to be extended
[Mon Jan 16 22:56:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 02:11:33 2012] XMMSAS src. selection expression = ellipse(18504.668167, 41262.295593, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 02:11:33 2012] Writing source region out to fullrun_mos2_xmm0604960401_pi300-10000_pass1_cl_src45_src.reg
[Tue Jan 17 02:11:33 2012] Extracting stamp from image fullrun_mos2_xmm0604960401_pi300-10000_cl_sm2.00.img.gz, (176, 437) - (251, 512)
[Tue Jan 17 02:11:33 2012] XMMSAS bgd. selection expression = annulus(18504.668167, 41262.295593, 1087.500000, 2175.000000, X, Y) && !ellipse(18711.180328, 38301.845001, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 02:11:33 2012] Writing fullrun_mos2_xmm0604960401_pi300-10000_pass1_cl_src45.gif
[Tue Jan 17 02:23:12 2012] Mean detx,y = (-12395.07, -11678.04) 
[Tue Jan 17 02:23:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 02:23:25 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 02:23:25 2012] Setting source spectrum file to fullrun_mos2_xmm0604960401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Jan 17 02:23:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960401_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Tue Jan 17 03:22:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 03:22:06 2012] rmf not generated due to insufficient counts
[Tue Jan 17 03:32:00 2012] Updating aperture counts using extracted products
[Tue Jan 17 03:32:00 2012] Error reading totcts from fullrun_mos2_xmm0604960401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Jan 17 03:32:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 03:32:01 2012] Using photon index=1.80, rate=0.000805, arf fullrun_mos2_xmm0604960401_pi300-10000_pass1_cl_src45.arf
[Tue Jan 17 03:32:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 03:32:01 2012] Updating source flux to 2.7e-14
[Tue Jan 17 03:33:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting