[Mon Jan 16 21:00:04 2012] Detection parameters:
  Position = (219.5, 119.3) = 3 33 1.63 -27 58 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.4 +/- 24.9
  Background counts = 180.4
  Rate = 0.003 +/- 0.0002

[Mon Jan 16 21:00:06 2012] Off-axis axis estimate = 14.20'
[Mon Jan 16 21:06:30 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 21:06:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 16 21:06:30 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Mon Jan 16 21:06:30 2012] source mask rpix=3.1, npix_max = 52, mask sum = 33, frac = 0.633
[Mon Jan 16 21:06:30 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 13.53"
[Mon Jan 16 22:17:39 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jan 16 22:17:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src8.csv
[Mon Jan 16 22:17:39 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jan 16 22:17:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src8.csv
[Mon Jan 16 22:17:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:17:40 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jan 16 22:17:40 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jan 16 22:17:40 2012] Fit fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Jan 16 23:37:51 2012] Source 9 is offset by -2.227067 and -7.538635 pixels which is larger than
2 X fitted extent = 2.248474 x 2.248474, not incorporating fit results
[Mon Jan 16 23:37:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:37:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:37:52 2012] Assessing source extent using major
[Mon Jan 16 23:37:52 2012] Source does appear to be extended
[Mon Jan 16 23:37:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 23:38:15 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 23:38:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 16 23:38:15 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Mon Jan 16 23:38:15 2012] source mask rpix=3.1, npix_max = 52, mask sum = 33, frac = 0.633
[Mon Jan 16 23:38:15 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 13.53"
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jan 17 00:39:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src8.csv
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jan 17 00:39:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src8.csv
[Tue Jan 17 00:39:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jan 17 00:39:25 2012] Fit fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jan 17 01:56:57 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.604484 pixels away
[Tue Jan 17 01:56:57 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:56:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:56:57 2012] Assessing source extent using major
[Tue Jan 17 01:56:57 2012] Source does appear to be extended
[Tue Jan 17 01:56:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 01:57:19 2012] XMMSAS src. selection expression = ellipse(19046.348572, 10326.678787, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 01:57:19 2012] Writing source region out to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src9_src.reg
[Tue Jan 17 01:57:19 2012] Extracting stamp from image fullrun_pn_xmm0604960301_pi300-10000_cl_sm2.00.img.gz, (182, 82) - (257, 157)
[Tue Jan 17 01:57:19 2012] XMMSAS bgd. selection expression = annulus(19046.348572, 10326.678787, 1087.500000, 2175.000000, X, Y) && !ellipse(16699.005310, 10882.973137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16176.130478, 13236.028030, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 01:57:19 2012] Writing fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src9.gif
[Tue Jan 17 02:10:23 2012] Mean detx,y = (-1802.00, -15546.21) 
[Tue Jan 17 02:10:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 02:10:58 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 02:10:59 2012] Setting source spectrum file to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jan 17 02:10:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jan 17 02:57:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 02:57:29 2012] rmf not generated due to insufficient counts
[Tue Jan 17 05:10:09 2012] Updating aperture counts using extracted products
[Tue Jan 17 05:10:09 2012] Error reading totcts from fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jan 17 05:10:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 05:10:10 2012] Using photon index=1.80, rate=0.00253, arf fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src9.arf
[Tue Jan 17 05:10:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 05:10:10 2012] Updating source flux to 3e-13
[Tue Jan 17 05:13:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting