[Mon Jan 16 21:00:04 2012] Detection parameters:
  Position = (327.5, 362.9) = 3 32 26.19 -27 40 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1163.3 +/- 48.5
  Background counts = 245.3
  Rate = 0.02 +/- 0.0007

[Mon Jan 16 21:00:06 2012] Off-axis axis estimate = 5.12'
[Mon Jan 16 21:06:30 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 21:06:30 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Mon Jan 16 21:06:30 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.949
[Mon Jan 16 21:06:30 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.99"
[Mon Jan 16 22:17:39 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jan 16 22:17:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src7.csv
[Mon Jan 16 22:17:39 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jan 16 22:17:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src7.csv
[Mon Jan 16 22:17:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:17:40 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jan 16 22:17:40 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jan 16 22:17:40 2012] Fit fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jan 16 23:37:51 2012] Source 8 is offset by -5.541919 and -2.180072 pixels which is larger than
2 X fitted extent = 1.005779 x 1.005779, not incorporating fit results
[Mon Jan 16 23:37:51 2012] Warning, spatial fit 7 centroid is now closest to src. 2
[Mon Jan 16 23:37:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:37:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:37:52 2012] Assessing source extent using major
[Mon Jan 16 23:37:52 2012] Source does appear to be extended
[Mon Jan 16 23:37:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 23:37:52 2012] Source is confused with source 2
[Mon Jan 16 23:38:15 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 23:38:15 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Mon Jan 16 23:38:15 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.949
[Mon Jan 16 23:38:15 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.99"
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jan 17 00:39:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src7.csv
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jan 17 00:39:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src7.csv
[Tue Jan 17 00:39:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jan 17 00:39:25 2012] Fit fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jan 17 01:56:57 2012] Source 8 is offset by 1.875191 and 6.491560 pixels which is larger than
2 X fitted extent = 2.414828 x 2.414828, not incorporating fit results
[Tue Jan 17 01:56:57 2012] Source 8 is offset by 1.565046 and 6.512686 pixels which is larger than
2 X fitted extent = 2.100782 x 2.100782, not incorporating fit results
[Tue Jan 17 01:56:57 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:56:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:56:57 2012] Assessing source extent using major
[Tue Jan 17 01:56:57 2012] Source does appear to be extended
[Tue Jan 17 01:56:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 01:57:19 2012] Counts = 1163.303589, rescaling region sizes by 2.000000
[Tue Jan 17 01:57:19 2012] XMMSAS src. selection expression = ellipse(28444.377014, 31520.857697, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jan 17 01:57:19 2012] Writing source region out to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src8_src.reg
[Tue Jan 17 01:57:19 2012] Extracting stamp from image fullrun_pn_xmm0604960301_pi300-10000_cl_sm2.00.img.gz, (253, 288) - (403, 438)
[Tue Jan 17 01:57:19 2012] XMMSAS bgd. selection expression = annulus(28444.377014, 31520.857697, 4350.000000, 8700.000000, X, Y) && !ellipse(33143.890933, 23175.367464, 525.359227, 401.223951, 113.110802, X, Y) && !ellipse(28280.814600, 30965.598000, 457.172813, 389.346411, 26.323100, X, Y) && !ellipse(31164.234161, 32829.675629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.203000, 32562.566200, 462.024813, 462.024813, 0.000000, X, Y) && !ellipse(32376.451508, 35329.271545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34414.637848, 35359.676941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33343.912780, 35227.890200, 414.096012, 414.096012, 0.000000, X, Y) && !ellipse(22740.378448, 30164.145691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27852.371200, 37529.885600, 518.133615, 518.133615, 0.000000, X, Y) && !ellipse(19382.481918, 38310.428711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28406.083527, 38255.955475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25831.203800, 37902.907200, 588.868017, 588.868017, 0.000000, X, Y) && !ellipse(19734.167099, 36836.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24114.869000, 34353.641800, 732.051989, 732.051989, 0.000000, X, Y) && !ellipse(26323.414825, 33219.675537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37871.098358, 30749.290253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29013.809113, 30592.154999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32676.728600, 28465.341000, 399.627211, 399.627211, 0.000000, X, Y) && !ellipse(35052.439606, 28135.456390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19763.729600, 27857.624600, 405.977612, 405.977612, 0.000000, X, Y) && !ellipse(27638.886261, 27317.728607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25726.931600, 27323.835400, 636.355218, 636.355218, 0.000000, X, Y) && !ellipse(32550.023600, 27147.642000, 406.884812, 406.884812, 0.000000, X, Y) && !ellipse(27495.677000, 25732.918400, 451.228813, 451.228813, 0.000000, X, Y)
[Tue Jan 17 01:57:19 2012] Writing fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src8.gif
[Tue Jan 17 02:07:58 2012] Mean detx,y = (-806.92, 7343.23) 
[Tue Jan 17 02:08:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 02:09:50 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 02:09:50 2012] Setting source spectrum file to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jan 17 02:09:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jan 17 02:57:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 02:57:25 2012] rmf not generated due to insufficient counts
[Tue Jan 17 05:10:09 2012] Updating aperture counts using extracted products
[Tue Jan 17 05:10:09 2012] Error reading totcts from fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jan 17 05:10:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 05:10:10 2012] Using photon index=1.80, rate=0.0163, arf fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src8.arf
[Tue Jan 17 05:10:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 05:10:10 2012] Updating source flux to 5.3e-14
[Tue Jan 17 05:13:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting