[Mon Jan 16 21:00:05 2012] Detection parameters:
  Position = (334.0, 352.2) = 3 32 24.05 -27 41 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.0 +/- 25.8
  Background counts = 246.3
  Rate = 0.002 +/- 0.0004

[Mon Jan 16 21:00:06 2012] Off-axis axis estimate = 4.67'
[Mon Jan 16 21:06:30 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 21:06:30 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Mon Jan 16 21:06:30 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988
[Mon Jan 16 21:06:30 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.77"
[Mon Jan 16 22:17:39 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jan 16 22:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src27.csv
[Mon Jan 16 22:17:39 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jan 16 22:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src27.csv
[Mon Jan 16 22:17:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:17:40 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jan 16 22:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Jan 16 22:17:40 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jan 16 22:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Jan 16 22:17:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 23:37:52 2012] Source 28 is offset by -5.470194 and -2.416697 pixels which is larger than
2 X fitted extent = 4.317375 x 4.317375, not incorporating fit results
[Mon Jan 16 23:37:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:37:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:37:52 2012] Assessing source extent using major
[Mon Jan 16 23:37:52 2012] Source does appear to be extended
[Mon Jan 16 23:37:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 23:38:15 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 23:38:15 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Mon Jan 16 23:38:15 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988
[Mon Jan 16 23:38:15 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.77"
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src27.ximg exists
[Tue Jan 17 00:39:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src27.csv
[Tue Jan 17 00:39:25 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Jan 17 00:39:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src27.csv
[Tue Jan 17 00:39:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 00:39:26 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Jan 17 00:39:26 2012] fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Jan 17 00:39:26 2012] Fit fullrun_pn_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Jan 17 01:56:57 2012] Warning, spatial fit 27 centroid is now closest to src. 8
[Tue Jan 17 01:56:57 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:56:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:56:57 2012] Assessing source extent using major
[Tue Jan 17 01:56:57 2012] Source does appear to be extended
[Tue Jan 17 01:56:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 01:57:19 2012] XMMSAS src. selection expression = ellipse(29013.809113, 30592.154999, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 01:57:19 2012] Writing source region out to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src28_src.reg
[Tue Jan 17 01:57:19 2012] Extracting stamp from image fullrun_pn_xmm0604960301_pi300-10000_cl_sm2.00.img.gz, (297, 315) - (372, 390)
[Tue Jan 17 01:57:19 2012] XMMSAS bgd. selection expression = annulus(29013.809113, 30592.154999, 1087.500000, 2175.000000, X, Y) && !ellipse(28280.814600, 30965.598000, 457.172813, 389.346411, 26.323100, X, Y) && !ellipse(31164.234161, 32829.675629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28444.377014, 31520.857697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26323.414825, 33219.675537, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 01:57:19 2012] Writing fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src28.gif
[Tue Jan 17 02:27:50 2012] Mean detx,y = (-1456.92, 7026.58) 
[Tue Jan 17 02:27:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 02:28:10 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 02:28:10 2012] Setting source spectrum file to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jan 17 02:28:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Jan 17 03:06:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 03:06:15 2012] rmf not generated due to insufficient counts
[Tue Jan 17 05:10:09 2012] Updating aperture counts using extracted products
[Tue Jan 17 05:10:09 2012] Error reading totcts from fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jan 17 05:10:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 05:10:11 2012] Using photon index=1.80, rate=0.00195, arf fullrun_pn_xmm0604960301_pi300-10000_pass1_cl_src28.arf
[Tue Jan 17 05:10:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 05:10:11 2012] Updating source flux to 7.1e-15
[Tue Jan 17 05:13:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting