[Mon Jan 16 21:00:10 2012] Detection parameters:
  Position = (220.3, 475.8) = 3 33 1.27 -27 32 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.3 +/- 25.0
  Background counts = 157.7
  Rate = 0.002 +/- 0.0002

[Mon Jan 16 21:00:12 2012] Off-axis axis estimate = 14.05'
[Mon Jan 16 22:45:10 2012] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 22:45:10 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Mon Jan 16 22:45:10 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.949
[Mon Jan 16 22:45:10 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 13.46"
[Mon Jan 16 23:37:38 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src23.ximg exists
[Mon Jan 16 23:37:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src23.csv
[Mon Jan 16 23:37:38 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Jan 16 23:37:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src23.csv
[Mon Jan 16 23:37:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 23:37:39 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Jan 16 23:37:39 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Jan 16 23:37:39 2012] Fit fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Jan 16 23:38:02 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.465461 pixels away
[Mon Jan 16 23:38:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:38:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:38:02 2012] Assessing source extent using major
[Mon Jan 16 23:38:02 2012] Source does appear to be extended
[Mon Jan 16 23:38:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 01:08:03 2012] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 01:08:03 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Tue Jan 17 01:08:03 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.949
[Tue Jan 17 01:08:03 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.46"
[Tue Jan 17 01:56:46 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src23.ximg exists
[Tue Jan 17 01:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src23.csv
[Tue Jan 17 01:56:46 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Jan 17 01:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src23.csv
[Tue Jan 17 01:56:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 01:56:47 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Jan 17 01:56:47 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Jan 17 01:56:47 2012] Fit fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Jan 17 01:57:07 2012] Spatial fit model total counts = 419.978000, observed total counts = 464.000000
[Tue Jan 17 01:57:07 2012] Offset between fit and detection position for source 6 = 4.273300 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.273300 pixels
  Position = (224.5, 476.6) = 3 32 59.90 -27 32 24.4
  Extent = 20.8 (15.2-23.9)", rotation angle = 0
  Source counts = 374.8 +/- 19.4
  Background counts = 0.0
  Rate = 0.004 +/- 0.0002
[Tue Jan 17 01:57:07 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:57:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:57:07 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 01:57:07 2012] Source does appear to be extended
[Tue Jan 17 01:57:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 04:05:08 2012] XMMSAS src. selection expression = ellipse(19480.636000, 41417.669280, 1247.670036, 1247.670036, 0.000000, X, Y)
[Tue Jan 17 04:05:08 2012] Writing source region out to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src6_src.reg
[Tue Jan 17 04:05:08 2012] Extracting stamp from image fullrun_mos2_xmm0604960301_pi300-10000_cl_sm2.00.img.gz, (153, 405) - (296, 548)
[Tue Jan 17 04:05:08 2012] XMMSAS bgd. selection expression = annulus(19480.636000, 41417.669280, 2079.450060, 4158.900120, X, Y) && !ellipse(19353.670868, 38358.875031, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 04:05:08 2012] Writing fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src6.gif
[Tue Jan 17 04:10:48 2012] Mean detx,y = (-11486.23, -12154.74) 
[Tue Jan 17 04:10:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 04:11:10 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 04:11:10 2012] Setting source spectrum file to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jan 17 04:11:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jan 17 05:10:13 2012] Updating aperture counts using extracted products
[Tue Jan 17 05:10:13 2012] Error reading totcts from fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jan 17 05:10:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 05:10:14 2012] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src6.arf
[Tue Jan 17 05:10:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 05:10:14 2012] Updating source flux to 8.9e-14