[Mon Jan 16 21:00:09 2012] Detection parameters:
  Position = (325.8, 356.9) = 3 32 26.75 -27 41 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2005.1 +/- 58.1
  Background counts = 239.0
  Rate = 0.02 +/- 0.0006

[Mon Jan 16 21:00:12 2012] Off-axis axis estimate = 4.68'
[Mon Jan 16 22:45:10 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 22:45:10 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Mon Jan 16 22:45:10 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.909
[Mon Jan 16 22:45:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.77"
[Mon Jan 16 23:37:38 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jan 16 23:37:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src1.csv
[Mon Jan 16 23:37:38 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jan 16 23:37:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src1.csv
[Mon Jan 16 23:37:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 23:37:39 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan 16 23:37:39 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan 16 23:37:39 2012] Fit fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jan 16 23:38:02 2012] Warning, spatial fit 1 centroid is now closest to src. 12
[Mon Jan 16 23:38:02 2012] Spatial fit model total counts = 2114.330000, observed total counts = 2119.000000
[Mon Jan 16 23:38:02 2012] Offset between fit and detection position for source 4 = 0.294649 pixels
[Mon Jan 16 23:38:02 2012] Warning, changing simple spatial fit ID from 1 to 7
[Mon Jan 16 23:38:02 2012] 2076.360000 total counts/ 1035.620000 bgd. counts: snr = 32.340150
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.294649 pixels
  Position = (325.5, 356.9) = 3 32 26.85 -27 41 5.4
  Extent = 5.4 (5.1-5.8)", rotation angle = 0
  Source counts = 1040.7 +/- 45.6
  Background counts = 1035.6
  Rate = 0.01 +/- 0.0004
[Mon Jan 16 23:38:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:38:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:38:02 2012] Assessing source extent using major axis lower bound
[Mon Jan 16 23:38:02 2012] Source does appear to be extended
[Mon Jan 16 23:38:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 23:38:02 2012] Source is confused with source 12
[Tue Jan 17 01:08:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 01:08:03 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Tue Jan 17 01:08:03 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.986
[Tue Jan 17 01:08:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Tue Jan 17 01:56:46 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 17 01:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 01:56:46 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 17 01:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 01:56:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 01:56:47 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 01:56:47 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 01:56:47 2012] Fit fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 01:57:07 2012] Spatial fit model total counts = 2225.110000, observed total counts = 2214.000000
[Tue Jan 17 01:57:07 2012] Offset between fit and detection position for source 4 = 0.049266 pixels
[Tue Jan 17 01:57:07 2012] 2298.990000 total counts/ 1034.170000 bgd. counts: snr = 39.330798
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.049266 pixels
  Position = (325.4, 356.9) = 3 32 26.87 -27 41 5.3
  Extent = 5.8 (5.6-6.0)", rotation angle = 0
  Source counts = 1264.8 +/- 47.9
  Background counts = 1034.2
  Rate = 0.01 +/- 0.0005
[Tue Jan 17 01:57:07 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:57:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:57:07 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 01:57:07 2012] Source does appear to be extended
[Tue Jan 17 01:57:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 04:05:07 2012] Counts = 1264.820000, rescaling region sizes by 2.000000
[Tue Jan 17 04:05:07 2012] XMMSAS src. selection expression = ellipse(28265.137400, 31000.417420, 697.081220, 697.081220, 0.000000, X, Y)
[Tue Jan 17 04:05:07 2012] Writing source region out to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4_src.reg
[Tue Jan 17 04:05:07 2012] Extracting stamp from image fullrun_mos2_xmm0604960301_pi300-10000_cl_sm2.00.img.gz, (285, 317) - (366, 397)
[Tue Jan 17 04:05:07 2012] XMMSAS bgd. selection expression = annulus(28265.137400, 31000.417420, 2323.604067, 4647.208134, X, Y) && !ellipse(25306.437600, 32564.420000, 562.810416, 562.810416, 0.000000, X, Y) && !ellipse(31172.979828, 32852.538086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28442.895508, 31588.640594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32393.622320, 35347.553200, 427.232012, 427.232012, 0.000000, X, Y) && !ellipse(32489.149536, 28562.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.215480, 26168.364000, 357.136810, 357.136810, 0.000000, X, Y) && !ellipse(33403.764648, 35232.421387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27447.821500, 26014.774000, 1133.200033, 297.564009, 83.589180, X, Y) && !ellipse(29461.925800, 33904.080200, 1600.552046, 1600.552046, 0.000000, X, Y) && !ellipse(29080.930908, 33836.834442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22641.102000, 32577.156000, 1537.424044, 1537.424044, 0.000000, X, Y) && !ellipse(25424.328979, 30981.249542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.663147, 35799.068359, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 04:05:07 2012] Writing fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4.gif
[Tue Jan 17 04:05:14 2012] Mean detx,y = (916.75, -7306.98) 
[Tue Jan 17 04:05:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 04:05:32 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 04:05:32 2012] Setting source spectrum file to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jan 17 04:05:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jan 17 05:10:13 2012] Updating aperture counts using extracted products
[Tue Jan 17 05:10:13 2012] Error reading totcts from fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jan 17 05:10:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 05:10:14 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4.arf
[Tue Jan 17 05:10:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 05:10:14 2012] Updating source flux to 1.6e-13
[Tue Jan 17 05:11:00 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Tue Jan 17 05:13:48 2012] Reading fit data from xmm0604960301/analysis//spectral/fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4_pl.csv
[Tue Jan 17 05:13:48 2012] Spectral fit parameter nH value = 2.60873e+20
[Tue Jan 17 05:13:48 2012] Spectral fit parameter PhoIndex value = 1.95552
[Tue Jan 17 05:13:48 2012] Failed to get F(0.3-8.0) from xmm0604960301/analysis//spectral/fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 05:13:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 05:13:48 2012] Using Nh = 2.6e+20, photon index=1.96, rate=0.0119, arf fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src4.arf
[Tue Jan 17 05:13:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 05:13:48 2012] Updating source flux to 1.5e-13