[Mon Jan 16 21:00:09 2012] Detection parameters:
  Position = (374.0, 328.9) = 3 32 10.95 -27 43 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 453.0 +/- 83.5
  Background counts = 225.1
  Rate = 0.004 +/- 0.0007

[Mon Jan 16 21:00:12 2012] Off-axis axis estimate = 5.91'
[Mon Jan 16 22:45:10 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 22:45:10 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Mon Jan 16 22:45:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.708
[Mon Jan 16 22:45:10 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.38"
[Mon Jan 16 23:37:38 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jan 16 23:37:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src11.csv
[Mon Jan 16 23:37:38 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jan 16 23:37:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src11.csv
[Mon Jan 16 23:37:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 23:37:39 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jan 16 23:37:39 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jan 16 23:37:39 2012] Fit fullrun_mos2_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Jan 16 23:38:02 2012] Source 2 is offset by 6.011535 and 7.492946 pixels which is larger than
2 X fitted extent = 5.407678 x 5.407678, not incorporating fit results
[Mon Jan 16 23:38:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:38:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:38:02 2012] Assessing source extent using major
[Mon Jan 16 23:38:02 2012] Source does appear to be extended
[Mon Jan 16 23:38:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 01:08:03 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 01:08:03 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Tue Jan 17 01:08:03 2012] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.708
[Tue Jan 17 01:08:03 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.38"
[Tue Jan 17 01:56:46 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jan 17 01:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src11.csv
[Tue Jan 17 01:56:46 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jan 17 01:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src11.csv
[Tue Jan 17 01:56:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 01:56:47 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jan 17 01:56:47 2012] fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jan 17 01:56:47 2012] Fit fullrun_mos2_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jan 17 01:57:07 2012] Source 2 is offset by 6.154339 and 7.492946 pixels which is larger than
2 X fitted extent = 5.581793 x 5.581793, not incorporating fit results
[Tue Jan 17 01:57:07 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:57:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:57:07 2012] Assessing source extent using major
[Tue Jan 17 01:57:07 2012] Source does appear to be extended
[Tue Jan 17 01:57:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 04:05:07 2012] XMMSAS src. selection expression = ellipse(32489.149536, 28562.876282, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 04:05:07 2012] Writing source region out to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src2_src.reg
[Tue Jan 17 04:05:07 2012] Extracting stamp from image fullrun_mos2_xmm0604960301_pi300-10000_cl_sm2.00.img.gz, (336, 291) - (411, 366)
[Tue Jan 17 04:05:07 2012] XMMSAS bgd. selection expression = annulus(32489.149536, 28562.876282, 1087.500000, 2175.000000, X, Y) && !ellipse(35052.174103, 28072.131287, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 04:05:07 2012] Writing fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src2.gif
[Tue Jan 17 04:08:16 2012] Mean detx,y = (5829.19, -7116.11) 
[Tue Jan 17 04:08:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 04:08:29 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 04:08:29 2012] Setting source spectrum file to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 04:08:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jan 17 04:39:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 04:39:31 2012] rmf not generated due to insufficient counts
[Tue Jan 17 05:10:13 2012] Updating aperture counts using extracted products
[Tue Jan 17 05:10:13 2012] Error reading totcts from fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 05:10:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 05:10:14 2012] Using photon index=1.80, rate=0.00373, arf fullrun_mos2_xmm0604960301_pi300-10000_pass1_cl_src2.arf
[Tue Jan 17 05:10:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 05:10:14 2012] Updating source flux to 7e-14
[Tue Jan 17 05:11:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting