[Mon Jan 16 21:00:07 2012] Detection parameters:
  Position = (169.1, 417.5) = 3 33 18.04 -27 36 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.9 +/- 25.9
  Background counts = 217.7
  Rate = 0.001 +/- 0.0002

[Mon Jan 16 21:00:09 2012] Off-axis axis estimate = 12.74'
[Mon Jan 16 22:17:40 2012] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 22:17:40 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Mon Jan 16 22:17:40 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.034
[Mon Jan 16 22:17:40 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.80"
[Mon Jan 16 22:45:10 2012] fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jan 16 22:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_src18.csv
[Mon Jan 16 22:45:10 2012] fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jan 16 22:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_src18.csv
[Mon Jan 16 22:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:45:10 2012] fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jan 16 22:45:10 2012] fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jan 16 22:45:10 2012] Fit fullrun_mos1_xmm0604960301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Mon Jan 16 23:37:57 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.574860 pixels away
[Mon Jan 16 23:37:57 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:37:57 2012] Assessing source extent using major
[Mon Jan 16 23:37:57 2012] Source does appear to be extended
[Mon Jan 16 23:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 00:39:26 2012] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 00:39:26 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Tue Jan 17 00:39:26 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.034
[Tue Jan 17 00:39:26 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 12.80"
[Tue Jan 17 01:08:03 2012] fullrun_mos1_xmm0604960301_pi300-10000_cl_pass1_src18.ximg exists
[Tue Jan 17 01:08:03 2012] fullrun_mos1_xmm0604960301_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Jan 17 01:08:03 2012] Fit fullrun_mos1_xmm0604960301_pi300-10000_cl_pass1_src18 appears to have run properly
[Tue Jan 17 01:08:03 2012] fullrun_mos1_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Jan 17 01:08:03 2012] fullrun_mos1_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Jan 17 01:08:03 2012] Fit fullrun_mos1_xmm0604960301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Jan 17 01:57:01 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.577683 pixels away
[Tue Jan 17 01:57:01 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:57:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:57:01 2012] Assessing source extent using major
[Tue Jan 17 01:57:01 2012] Source does appear to be extended
[Tue Jan 17 01:57:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 03:32:04 2012] XMMSAS src. selection expression = ellipse(14662.648285, 36271.098053, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 03:32:04 2012] Writing source region out to fullrun_mos1_xmm0604960301_pi300-10000_pass1_cl_src4_src.reg
[Tue Jan 17 03:32:04 2012] Extracting stamp from image fullrun_mos1_xmm0604960301_pi300-10000_cl_sm2.00.img.gz, (132, 380) - (207, 455)
[Tue Jan 17 03:32:04 2012] XMMSAS bgd. selection expression = annulus(14662.648285, 36271.098053, 1087.500000, 2175.000000, X, Y) && !ellipse(13922.878799, 33262.450714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18381.895630, 35199.164490, 1740.000000, 1740.000000, 0.000000, X, Y)
[Tue Jan 17 03:32:04 2012] Writing fullrun_mos1_xmm0604960301_pi300-10000_pass1_cl_src4.gif
[Tue Jan 17 03:38:54 2012] Mean detx,y = (-5450.07, 13379.47) 
[Tue Jan 17 03:38:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 03:39:06 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 03:39:06 2012] Setting source spectrum file to fullrun_mos1_xmm0604960301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jan 17 03:39:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604960301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jan 17 04:01:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 04:01:29 2012] rmf not generated due to insufficient counts
[Tue Jan 17 05:10:12 2012] Updating aperture counts using extracted products
[Tue Jan 17 05:10:12 2012] Error reading totcts from fullrun_mos1_xmm0604960301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jan 17 05:10:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 05:10:13 2012] Using photon index=1.80, rate=0.00128, arf fullrun_mos1_xmm0604960301_pi300-10000_pass1_cl_src4.arf
[Tue Jan 17 05:10:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 05:10:13 2012] Updating source flux to 2.6e-14
[Tue Jan 17 05:10:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting