[Tue Jan 17 06:58:42 2012] Detection parameters:
  Position = (111.1, 333.2) = 3 33 34.84 -27 42 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 515.0 +/- 31.1
  Background counts = 104.3
  Rate = 0.004 +/- 0.0003

[Tue Jan 17 06:58:43 2012] Off-axis axis estimate = 13.81'
[Tue Jan 17 08:32:39 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 08:32:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 08:32:39 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Tue Jan 17 08:32:39 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.964
[Tue Jan 17 08:32:39 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.33"
[Tue Jan 17 09:14:31 2012] fullrun_mos2_xmm0604960201_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jan 17 09:14:31 2012] fullrun_mos2_xmm0604960201_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jan 17 09:14:31 2012] Fit fullrun_mos2_xmm0604960201_pi300-10000_cl_pass0_src6 appears to have run properly
[Tue Jan 17 09:14:31 2012] fullrun_mos2_xmm0604960201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jan 17 09:14:31 2012] fullrun_mos2_xmm0604960201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jan 17 09:14:31 2012] Fit fullrun_mos2_xmm0604960201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Jan 17 09:14:45 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 18.688999 pixels away
[Tue Jan 17 09:14:45 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 09:14:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 09:14:45 2012] Assessing source extent using major
[Tue Jan 17 09:14:45 2012] Source does appear to be extended
[Tue Jan 17 09:14:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 11:14:04 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:14:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 11:14:04 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Tue Jan 17 11:14:04 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.964
[Tue Jan 17 11:14:04 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.33"
[Tue Jan 17 12:18:06 2012] fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jan 17 12:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_src6.csv
[Tue Jan 17 12:18:06 2012] fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jan 17 12:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_src6.csv
[Tue Jan 17 12:18:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 12:18:07 2012] fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jan 17 12:18:07 2012] fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jan 17 12:18:07 2012] Fit fullrun_mos2_xmm0604960201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Jan 17 12:18:33 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.002311 pixels away
[Tue Jan 17 12:18:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 12:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 12:18:33 2012] Assessing source extent using major
[Tue Jan 17 12:18:33 2012] Source does appear to be extended
[Tue Jan 17 12:18:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 16:01:07 2012] XMMSAS src. selection expression = ellipse(9620.929520, 28943.596863, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 16:01:07 2012] Writing source region out to fullrun_mos2_xmm0604960201_pi300-10000_pass1_cl_src1_src.reg
[Tue Jan 17 16:01:07 2012] Extracting stamp from image fullrun_mos2_xmm0604960201_pi300-10000_cl_sm2.00.img.gz, (74, 296) - (149, 371)
[Tue Jan 17 16:01:07 2012] XMMSAS bgd. selection expression = annulus(9620.929520, 28943.596863, 1087.500000, 2175.000000, X, Y)
[Tue Jan 17 16:01:07 2012] Writing fullrun_mos2_xmm0604960201_pi300-10000_pass1_cl_src1.gif
[Tue Jan 17 16:02:57 2012] Mean detx,y = (-14672.03, 3239.59) 
[Tue Jan 17 16:02:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 16:03:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 16:03:11 2012] Setting source spectrum file to fullrun_mos2_xmm0604960201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 16:03:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jan 17 16:28:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 16:28:59 2012] rmf not generated due to insufficient counts
[Tue Jan 17 17:25:05 2012] Updating aperture counts using extracted products
[Tue Jan 17 17:25:05 2012] Error reading totcts from fullrun_mos2_xmm0604960201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 17:25:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 17:25:06 2012] Using photon index=1.80, rate=0.00432, arf fullrun_mos2_xmm0604960201_pi300-10000_pass1_cl_src1.arf
[Tue Jan 17 17:25:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 17:25:06 2012] Updating source flux to 1e-13
[Tue Jan 17 17:26:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting