[Tue Jan 17 06:58:41 2012] Detection parameters:
  Position = (319.1, 348.0) = 3 32 26.73 -27 41 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1979.6 +/- 55.1
  Background counts = 143.6
  Rate = 0.02 +/- 0.0006

[Tue Jan 17 06:58:42 2012] Off-axis axis estimate = 3.90'
[Tue Jan 17 08:10:09 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 08:10:09 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Tue Jan 17 08:10:09 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.680
[Tue Jan 17 08:10:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.38"
[Tue Jan 17 08:32:38 2012] fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan 17 08:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 08:32:38 2012] fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan 17 08:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 08:32:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 08:32:38 2012] fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 08:32:38 2012] fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 08:32:38 2012] Fit fullrun_mos1_xmm0604960201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 09:14:41 2012] Spatial fit model total counts = 2011.000000, observed total counts = 2011.000000
[Tue Jan 17 09:14:41 2012] Offset between fit and detection position for source 2 = 0.173264 pixels
[Tue Jan 17 09:14:41 2012] 1961.281000 total counts/ 712.021000 bgd. counts: snr = 46.817307
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.173264 pixels
  Position = (318.9, 348.1) = 3 32 26.78 -27 41 6.6
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 1249.3 +/- 44.3
  Background counts = 712.0
  Rate = 0.01 +/- 0.0004
[Tue Jan 17 09:14:41 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 09:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 09:14:41 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 09:14:41 2012] Source does appear to be extended
[Tue Jan 17 09:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 10:39:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 10:39:33 2012] Initial guess for spatial extent in simple fitting = 5.00"
[Tue Jan 17 10:39:33 2012] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.472
[Tue Jan 17 10:39:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.00"
[Tue Jan 17 11:14:04 2012] fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 17 11:14:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 11:14:04 2012] fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 17 11:14:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 11:14:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:14:04 2012] fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 11:14:04 2012] fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 11:14:04 2012] Fit fullrun_mos1_xmm0604960201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 12:18:25 2012] Spatial fit model total counts = 2011.000000, observed total counts = 2011.000000
[Tue Jan 17 12:18:25 2012] Offset between fit and detection position for source 2 = 0.000028 pixels
[Tue Jan 17 12:18:25 2012] 1961.300000 total counts/ 711.480000 bgd. counts: snr = 46.856098
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000028 pixels
  Position = (318.9, 348.1) = 3 32 26.78 -27 41 6.6
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 1249.8 +/- 44.3
  Background counts = 711.5
  Rate = 0.01 +/- 0.0004
[Tue Jan 17 12:18:25 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 12:18:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 12:18:25 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 12:18:25 2012] Source does appear to be extended
[Tue Jan 17 12:18:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:13:20 2012] Counts = 1249.820000, rescaling region sizes by 2.000000
[Tue Jan 17 15:13:20 2012] XMMSAS src. selection expression = ellipse(27696.896440, 30237.549200, 600.172965, 600.172965, 0.000000, X, Y)
[Tue Jan 17 15:13:20 2012] Writing source region out to fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2_src.reg
[Tue Jan 17 15:13:20 2012] Extracting stamp from image fullrun_mos1_xmm0604960201_pi300-10000_cl_sm2.00.img.gz, (284, 314) - (353, 383)
[Tue Jan 17 15:13:20 2012] XMMSAS bgd. selection expression = annulus(27696.896440, 30237.549200, 2000.576550, 4001.153099, X, Y) && !ellipse(24768.531000, 31804.881000, 597.644017, 597.644017, 0.000000, X, Y) && !ellipse(32057.704620, 27817.867096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31977.721863, 26475.324982, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 15:13:20 2012] Writing fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2.gif
[Tue Jan 17 15:13:26 2012] Mean detx,y = (-6053.41, -974.04) 
[Tue Jan 17 15:13:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 15:13:49 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 15:13:49 2012] Setting source spectrum file to fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 15:13:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jan 17 17:25:04 2012] Updating aperture counts using extracted products
[Tue Jan 17 17:25:04 2012] Error reading totcts from fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 17:25:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 17:25:04 2012] Using photon index=1.80, rate=0.0116, arf fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2.arf
[Tue Jan 17 17:25:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 17:25:04 2012] Updating source flux to 1.5e-13
[Tue Jan 17 17:26:25 2012] Reading fit data from xmm0604960201/analysis//spectral/fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jan 17 17:26:25 2012] Spectral fit parameter nH value = 6.19529e+13
[Tue Jan 17 17:26:25 2012] Spectral fit parameter PhoIndex value = 2.06081
[Tue Jan 17 17:26:25 2012] Failed to get F(0.3-8.0) from xmm0604960201/analysis//spectral/fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 17:26:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 17:26:25 2012] Using Nh = 6.2e+13, photon index=2.06, rate=0.0116, arf fullrun_mos1_xmm0604960201_pi300-10000_pass1_cl_src2.arf
[Tue Jan 17 17:26:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 17:26:25 2012] Updating source flux to 1.4e-13