[Tue Jan 17 21:30:17 2012] Detection parameters:
  Position = (324.0, 339.3) = 3 32 27.25 -27 41 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.8 +/- 26.9
  Background counts = 258.7
  Rate = 0.002 +/- 0.0003

[Tue Jan 17 21:30:19 2012] Off-axis axis estimate = 3.49'
[Tue Jan 17 21:35:50 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:35:50 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Tue Jan 17 21:35:50 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.883
[Tue Jan 17 21:35:50 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.18"
[Tue Jan 17 22:38:18 2012] fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_src29.ximg exists
[Tue Jan 17 22:38:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_src29.csv
[Tue Jan 17 22:38:18 2012] fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Jan 17 22:38:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_src29.csv
[Tue Jan 17 22:38:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:38:19 2012] fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Jan 17 22:38:19 2012] fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Jan 17 22:38:19 2012] Fit fullrun_pn_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Jan 17 23:38:00 2012] Source 32 is offset by -1.088086 and -8.217998 pixels which is larger than
2 X fitted extent = 2.578340 x 2.578340, not incorporating fit results
[Tue Jan 17 23:38:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 23:38:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 23:38:00 2012] Assessing source extent using major
[Tue Jan 17 23:38:00 2012] Source does appear to be extended
[Tue Jan 17 23:38:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:38:21 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:38:21 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Tue Jan 17 23:38:21 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.883
[Tue Jan 17 23:38:21 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 8.18"
[Wed Jan 18 01:28:48 2012] fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_src28.ximg exists
[Wed Jan 18 01:28:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_src28.csv
[Wed Jan 18 01:28:48 2012] fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Jan 18 01:28:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_src28.csv
[Wed Jan 18 01:28:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 01:28:49 2012] fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Jan 18 01:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Jan 18 01:28:49 2012] fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Jan 18 01:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Jan 18 01:28:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 02:23:35 2012] Spatial fit model total counts = 1924.240000, observed total counts = 2958.000000
[Wed Jan 18 02:23:35 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jan 18 02:23:35 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 02:23:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 02:23:35 2012] Assessing source extent using major
[Wed Jan 18 02:23:35 2012] Source does appear to be extended
[Wed Jan 18 02:23:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 02:23:53 2012] XMMSAS src. selection expression = ellipse(28140.086761, 29470.612213, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 18 02:23:53 2012] Writing source region out to fullrun_pn_xmm0604960101_pi300-10000_pass1_cl_src32_src.reg
[Wed Jan 18 02:23:53 2012] Extracting stamp from image fullrun_pn_xmm0604960101_pi300-10000_cl_sm2.00.img.gz, (287, 302) - (362, 377)
[Wed Jan 18 02:23:53 2012] XMMSAS bgd. selection expression = annulus(28140.086761, 29470.612213, 1087.500000, 2175.000000, X, Y) && !ellipse(28220.355266, 30232.526966, 455.291764, 395.561526, 46.095090, X, Y) && !ellipse(25284.873566, 31815.342926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31109.917572, 32124.083008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28363.277800, 30834.238000, 282.131208, 282.131208, 0.000000, X, Y)
[Wed Jan 18 02:23:53 2012] Writing fullrun_pn_xmm0604960101_pi300-10000_pass1_cl_src32.gif
[Wed Jan 18 02:59:16 2012] Mean detx,y = (-1357.02, 5815.17) 
[Wed Jan 18 02:59:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 02:59:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 02:59:36 2012] Setting source spectrum file to fullrun_pn_xmm0604960101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jan 18 02:59:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Jan 18 03:51:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 18 03:51:04 2012] rmf not generated due to insufficient counts
[Wed Jan 18 05:49:01 2012] Updating aperture counts using extracted products
[Wed Jan 18 05:49:01 2012] Error reading totcts from fullrun_pn_xmm0604960101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jan 18 05:49:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:49:02 2012] Using photon index=1.80, rate=0.00202, arf fullrun_pn_xmm0604960101_pi300-10000_pass1_cl_src32.arf
[Wed Jan 18 05:49:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:49:02 2012] Updating source flux to 6.6e-15
[Wed Jan 18 05:51:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting