[Tue Jan 17 21:30:21 2012] Detection parameters:
  Position = (325.4, 346.4) = 3 32 26.81 -27 41 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1457.9 +/- 45.1
  Background counts = 96.9
  Rate = 0.01 +/- 0.0004

[Tue Jan 17 21:30:23 2012] Off-axis axis estimate = 3.99'
[Tue Jan 17 23:04:31 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:04:31 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Tue Jan 17 23:04:31 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.885
[Tue Jan 17 23:04:31 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.42"
[Tue Jan 17 23:37:52 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jan 17 23:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src2.csv
[Tue Jan 17 23:37:52 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jan 17 23:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src2.csv
[Tue Jan 17 23:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 23:37:52 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jan 17 23:37:52 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jan 17 23:37:52 2012] Fit fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jan 17 23:38:10 2012] Warning, spatial fit 2 centroid is now closest to src. 19
[Tue Jan 17 23:38:10 2012] Source 2 is offset by 0.377031 and -1.579436 pixels which is larger than
2 X fitted extent = 1.207453 x 1.207453, not incorporating fit results
[Tue Jan 17 23:38:10 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 23:38:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 23:38:10 2012] Assessing source extent using major
[Tue Jan 17 23:38:10 2012] Source does appear to be extended
[Tue Jan 17 23:38:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 01:51:56 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 01:51:56 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Wed Jan 18 01:51:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.885
[Wed Jan 18 01:51:56 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.42"
[Wed Jan 18 02:23:27 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jan 18 02:23:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src2.csv
[Wed Jan 18 02:23:27 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jan 18 02:23:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src2.csv
[Wed Jan 18 02:23:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 02:23:28 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jan 18 02:23:28 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jan 18 02:23:28 2012] Fit fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jan 18 02:23:41 2012] Warning, spatial fit 2 centroid is now closest to src. 19
[Wed Jan 18 02:23:42 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 02:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 02:23:42 2012] Assessing source extent using major
[Wed Jan 18 02:23:42 2012] Source does appear to be extended
[Wed Jan 18 02:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 05:03:09 2012] Counts = 1457.887329, rescaling region sizes by 2.000000
[Wed Jan 18 05:03:09 2012] XMMSAS src. selection expression = ellipse(28258.193085, 30087.625092, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jan 18 05:03:09 2012] Writing source region out to fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src2_src.reg
[Wed Jan 18 05:03:09 2012] Extracting stamp from image fullrun_mos2_xmm0604960101_pi300-10000_cl_sm2.00.img.gz, (250, 271) - (400, 421)
[Wed Jan 18 05:03:09 2012] XMMSAS bgd. selection expression = annulus(28258.193085, 30087.625092, 4350.000000, 8700.000000, X, Y) && !ellipse(33106.061140, 22459.906000, 450.441613, 450.441613, 0.000000, X, Y) && !ellipse(31092.378448, 32141.253082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27822.898800, 36987.848000, 689.204820, 689.204820, 0.000000, X, Y) && !ellipse(25331.440125, 31559.347656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22672.834020, 28476.517000, 294.580008, 294.580008, 0.000000, X, Y) && !ellipse(28335.192800, 30876.724800, 328.200809, 328.200809, 0.000000, X, Y) && !ellipse(32350.564972, 34597.808319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22674.804320, 29365.287200, 421.632012, 421.632012, 0.000000, X, Y) && !ellipse(32609.922550, 27717.657720, 536.155950, 271.728917, 89.475205, X, Y) && !ellipse(19504.947800, 22157.834488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24051.151220, 33623.282980, 380.387875, 226.286842, 359.747584, X, Y) && !ellipse(27426.164400, 24987.654000, 394.991211, 394.991211, 0.000000, X, Y) && !ellipse(19383.981202, 37617.299167, 718.908908, 222.912006, 0.214530, X, Y) && !ellipse(33288.220160, 34491.287200, 539.644016, 250.079207, 60.499000, X, Y) && !ellipse(26232.203949, 32421.472839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27376.750200, 25320.284000, 718.404821, 718.404821, 0.000000, X, Y) && !ellipse(34351.838440, 34641.154327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.357300, 36029.442596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19720.612800, 27166.408400, 293.605608, 293.605608, 0.000000, X, Y) && !ellipse(25823.995850, 37154.540466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35082.648260, 27478.190800, 736.272021, 736.272021, 0.000000, X, Y)
[Wed Jan 18 05:03:09 2012] Writing fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src2.gif
[Wed Jan 18 05:03:30 2012] Mean detx,y = (1295.71, -6494.81) 
[Wed Jan 18 05:03:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 05:04:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 05:04:35 2012] Setting source spectrum file to fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jan 18 05:04:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jan 18 05:14:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 18 05:14:51 2012] rmf not generated due to insufficient counts
[Wed Jan 18 05:49:03 2012] Updating aperture counts using extracted products
[Wed Jan 18 05:49:03 2012] Error reading totcts from fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jan 18 05:49:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:49:04 2012] Using photon index=1.80, rate=0.0127, arf fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src2.arf
[Wed Jan 18 05:49:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:49:04 2012] Updating source flux to 1.6e-13
[Wed Jan 18 05:50:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting