[Tue Jan 17 21:30:22 2012] Detection parameters:
  Position = (326.4, 355.4) = 3 32 26.46 -27 40 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 311.5 +/- 25.2
  Background counts = 93.4
  Rate = 0.004 +/- 0.0003

[Tue Jan 17 21:30:23 2012] Off-axis axis estimate = 4.60'
[Tue Jan 17 23:04:31 2012] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:04:31 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Tue Jan 17 23:04:31 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.835
[Tue Jan 17 23:04:31 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.73"
[Tue Jan 17 23:37:52 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jan 17 23:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src9.csv
[Tue Jan 17 23:37:52 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jan 17 23:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src9.csv
[Tue Jan 17 23:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 23:37:52 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jan 17 23:37:52 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jan 17 23:37:52 2012] Fit fullrun_mos2_xmm0604960101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jan 17 23:38:10 2012] Source 19 is offset by -6.319549 and 0.702485 pixels which is larger than
2 X fitted extent = 0.968074 x 0.968074, not incorporating fit results
[Tue Jan 17 23:38:10 2012] Warning, spatial fit 9 centroid is now closest to src. 2
[Tue Jan 17 23:38:10 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 23:38:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 23:38:10 2012] Assessing source extent using major
[Tue Jan 17 23:38:10 2012] Source does appear to be extended
[Tue Jan 17 23:38:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 01:51:56 2012] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 01:51:56 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Wed Jan 18 01:51:56 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.835
[Wed Jan 18 01:51:56 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.73"
[Wed Jan 18 02:23:28 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jan 18 02:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src9.csv
[Wed Jan 18 02:23:28 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jan 18 02:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src9.csv
[Wed Jan 18 02:23:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 02:23:28 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jan 18 02:23:28 2012] fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jan 18 02:23:28 2012] Fit fullrun_mos2_xmm0604960101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jan 18 02:23:41 2012] Source 19 is offset by -6.319549 and 0.702485 pixels which is larger than
2 X fitted extent = 0.968074 x 0.968074, not incorporating fit results
[Wed Jan 18 02:23:42 2012] Spatial fit model total counts = 1538.000000, observed total counts = 1538.000000
[Wed Jan 18 02:23:42 2012] Offset between fit and detection position for source 19 = 0.176369 pixels
[Wed Jan 18 02:23:42 2012] 1434.508000 total counts/ 1284.960000 bgd. counts: snr = 4.171918
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.176369 pixels
  Position = (326.2, 355.5) = 3 32 26.52 -27 40 33.7
  Extent = 4.1 (3.3-4.8)", rotation angle = 0
  Source counts = 149.5 +/- 37.9
  Background counts = 1285.0
  Rate = 0.001 +/- 0.0003
[Wed Jan 18 02:23:42 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 02:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 02:23:42 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 02:23:42 2012] Source does appear to be extended
[Wed Jan 18 02:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 05:03:09 2012] XMMSAS src. selection expression = ellipse(28335.192800, 30876.724800, 246.150607, 246.150607, 0.000000, X, Y)
[Wed Jan 18 05:03:09 2012] Writing source region out to fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src19_src.reg
[Wed Jan 18 05:03:09 2012] Extracting stamp from image fullrun_mos2_xmm0604960101_pi300-10000_cl_sm2.00.img.gz, (312, 341) - (340, 370)
[Wed Jan 18 05:03:09 2012] XMMSAS bgd. selection expression = annulus(28335.192800, 30876.724800, 410.251012, 820.502024, X, Y) && !ellipse(28258.193085, 30087.625092, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 18 05:03:09 2012] Writing fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src19.gif
[Wed Jan 18 05:05:50 2012] Mean detx,y = (1044.62, -7133.53) 
[Wed Jan 18 05:05:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 05:05:56 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 05:05:56 2012] Setting source spectrum file to fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jan 18 05:05:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Jan 18 05:49:03 2012] Updating aperture counts using extracted products
[Wed Jan 18 05:49:03 2012] Error reading totcts from fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jan 18 05:49:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:49:04 2012] Using photon index=1.80, rate=0.00137, arf fullrun_mos2_xmm0604960101_pi300-10000_pass1_cl_src19.arf
[Wed Jan 18 05:49:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:49:04 2012] Updating source flux to 2.5e-14
[Wed Jan 18 05:50:24 2012] Flag b found in src. 19 procflags, skipping spectral fitting