[Mon May 13 09:23:02 2013] Detection parameters:
  Position = (342.6, 212.2) = 0 6 39.76 72 57 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.2 +/- 23.4
  Background counts = 177.5
  Rate = 0.004 +/- 0.0004

[Mon May 13 09:23:03 2013] Off-axis axis estimate = 7.02'
[Mon May 13 09:23:18 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Mon May 13 09:23:18 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Mon May 13 09:23:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.645
[Mon May 13 09:23:18 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.94"
[Mon May 13 09:23:18 2013] fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 13 09:23:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_src4.csv
[Mon May 13 09:23:18 2013] fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 13 09:23:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_src4.csv
[Mon May 13 09:23:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:23:18 2013] fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 13 09:23:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 09:23:18 2013] fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 13 09:23:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 09:23:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604940101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:23:26 2013] Spatial fit model total counts = 1142.340000, observed total counts = 940.000000
[Mon May 13 09:23:26 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 09:23:26 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:23:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:23:26 2013] Assessing source extent using major
[Mon May 13 09:23:26 2013] Source does appear to be extended
[Mon May 13 09:23:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:23:34 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Mon May 13 09:23:34 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Mon May 13 09:23:34 2013] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.645
[Mon May 13 09:23:34 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.94"
[Mon May 13 09:23:35 2013] fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 13 09:23:35 2013] fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 13 09:23:35 2013] Fit fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_src4 appears to have run properly
[Mon May 13 09:23:35 2013] fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 13 09:23:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 13 09:23:35 2013] fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 13 09:23:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 13 09:23:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604940101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:23:44 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.917659 pixels away
[Mon May 13 09:23:44 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:23:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:23:44 2013] Assessing source extent using major
[Mon May 13 09:23:44 2013] Source does appear to be extended
[Mon May 13 09:23:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:26:27 2013] XMMSAS src. selection expression = ellipse(29761.300751, 18413.989624, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 09:26:27 2013] Not overwriting source region fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_src.reg
[Mon May 13 09:26:27 2013] Extracting stamp from image fullrun_mos2_xmm0604940101_pi300-10000_cl_sm2.00.img.gz, (305, 175) - (380, 250)
[Mon May 13 09:26:27 2013] XMMSAS bgd. selection expression = annulus(29761.300751, 18413.989624, 1087.500000, 2175.000000, X, Y) && !ellipse(30650.435000, 20404.598600, 344.122410, 344.122410, 0.000000, X, Y) && !ellipse(32220.427800, 20869.250000, 495.081614, 495.081614, 0.000000, X, Y)
[Mon May 13 09:26:27 2013] Writing fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3.gif
[Mon May 13 09:26:28 2013] ../../xmm0604940101/products/events/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0604940101/products/events/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon May 13 09:26:28 2013] Mean detx,y = (-6969.69, 389.86) 
[Mon May 13 09:26:28 2013] ../../xmm0604940101/products/images/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0604940101/products/images/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon May 13 09:26:28 2013] ../../xmm0604940101/products/spectra/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_src.pi and ../../xmm0604940101/products/spectra/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon May 13 09:26:28 2013] Setting source spectrum file to fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_src.pi.gz
[Mon May 13 09:26:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 13 09:26:28 2013] ../../xmm0604940101/products/lightcurves/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0604940101/products/lightcurves/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon May 13 09:26:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 09:26:31 2013] rmf not generated due to insufficient counts
[Mon May 13 09:27:54 2013] Updating aperture counts using extracted products
[Mon May 13 09:27:54 2013] Total counts from fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_src.pi.gz = 648.00
[Mon May 13 09:27:54 2013] Total counts from fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 5133.00
[Mon May 13 09:27:54 2013] Got source and background scale factors 1069792.000000, 10524560.000000
[Mon May 13 09:27:54 2013] User source parameters:
  Position = (342.6, 212.2) = 0 6 39.76 72 57 33.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 126.2 +/- 26.5
  Background aperture counts = 521.8
  Rate = 0.001 +/- 0.0002

[Mon May 13 09:27:54 2013] Updating counts from extracted products
[Mon May 13 09:27:54 2013] Set source signif. to 126.24/22.84 = 5.53
[Mon May 13 09:27:57 2013] No arf file for this source, not re-computing flux
[Mon May 13 09:27:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 09:28:00 2013] xmm0604940101/analysis//spectral/fullrun_mos2_xmm0604940101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete