[Sun Aug 26 00:11:37 2012] Detection parameters:
  Position = (350.1, 412.0) = 20 50 36.75 35 44 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.3 +/- 26.4
  Background counts = 178.6
  Rate = 0.006 +/- 0.0005

[Sun Aug 26 00:11:38 2012] Off-axis axis estimate = 9.04'
[Sun Aug 26 00:15:42 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 00:15:42 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Sun Aug 26 00:15:42 2012] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.824
[Sun Aug 26 00:15:42 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.95"
[Sun Aug 26 01:16:40 2012] fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_src15.ximg exists
[Sun Aug 26 01:16:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_src15.csv
[Sun Aug 26 01:16:40 2012] fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Aug 26 01:16:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_src15.csv
[Sun Aug 26 01:16:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 01:16:40 2012] fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Aug 26 01:16:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Aug 26 01:16:40 2012] fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Aug 26 01:16:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Aug 26 01:16:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 02:12:08 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.871433 pixels away
[Sun Aug 26 02:12:08 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 02:12:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 02:12:08 2012] Assessing source extent using major
[Sun Aug 26 02:12:08 2012] Source does appear to be extended
[Sun Aug 26 02:12:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 02:12:27 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 02:12:27 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Sun Aug 26 02:12:27 2012] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.824
[Sun Aug 26 02:12:27 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.95"
[Sun Aug 26 03:09:02 2012] fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_src15.ximg exists
[Sun Aug 26 03:09:02 2012] fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Aug 26 03:09:02 2012] Fit fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_src15 appears to have run properly
[Sun Aug 26 03:09:03 2012] fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Aug 26 03:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Aug 26 03:09:03 2012] fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Aug 26 03:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Aug 26 03:09:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 04:04:05 2012] Spatial fit model total counts = 686.509000, observed total counts = 731.000000
[Sun Aug 26 04:04:05 2012] Offset between fit and detection position for source 17 = 1.500456 pixels
[Sun Aug 26 04:04:05 2012] 678.751000 total counts/ 636.765000 bgd. counts: snr = 1.663853
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.500456 pixels
  Position = (351.5, 411.4) = 20 50 36.26 35 44 20.4
  Extent = 3.7" x 3.7", rotation angle = 0
  Source counts = 42.0 +/- 26.1
  Background counts = 636.8
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability