[Sun Aug 26 00:12:21 2012] Detection parameters:
  Position = (274.3, 242.1) = 20 51 3.82 35 32 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.6 +/- 16.2
  Background counts = 54.4
  Rate = 0.002 +/- 0.0003

[Sun Aug 26 00:12:21 2012] Off-axis axis estimate = 4.44'
[Sun Aug 26 01:38:13 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 01:38:13 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Sun Aug 26 01:38:13 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.009
[Sun Aug 26 01:38:13 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.65"
[Sun Aug 26 02:11:58 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 26 02:11:58 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 26 02:11:58 2012] Fit fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_src21 appears to have run properly
[Sun Aug 26 02:11:59 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 26 02:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug 26 02:11:59 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 26 02:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug 26 02:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 02:12:16 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 15.763026 pixels away
[Sun Aug 26 02:12:16 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 02:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 02:12:16 2012] Assessing source extent using major
[Sun Aug 26 02:12:16 2012] Source does appear to be extended
[Sun Aug 26 02:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 03:32:14 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 03:32:14 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Sun Aug 26 03:32:14 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.009
[Sun Aug 26 03:32:14 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.65"
[Sun Aug 26 04:03:55 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src21.ximg exists
[Sun Aug 26 04:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src21.csv
[Sun Aug 26 04:03:55 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Aug 26 04:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src21.csv
[Sun Aug 26 04:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 04:03:55 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Aug 26 04:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Aug 26 04:03:55 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Aug 26 04:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Aug 26 04:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 04:04:13 2012] Spatial fit model total counts = 459.535000, observed total counts = 404.000000
[Sun Aug 26 04:04:13 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 26 04:04:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 04:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 04:04:13 2012] Assessing source extent using major
[Sun Aug 26 04:04:13 2012] Source does appear to be extended
[Sun Aug 26 04:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 04:50:31 2012] XMMSAS src. selection expression = ellipse(23813.068695, 21015.602386, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 26 04:50:31 2012] Writing source region out to fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src23_src.reg
[Sun Aug 26 04:50:31 2012] Extracting stamp from image fullrun_mos2_xmm0604920301_pi300-10000_cl_sm2.00.img.gz, (237, 205) - (312, 280)
[Sun Aug 26 04:50:31 2012] XMMSAS bgd. selection expression = annulus(23813.068695, 21015.602386, 1087.500000, 2175.000000, X, Y) && !ellipse(22669.368220, 20955.475200, 483.446414, 483.446414, 0.000000, X, Y)
[Sun Aug 26 04:50:31 2012] Writing fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src23.gif
[Sun Aug 26 04:56:20 2012] Mean detx,y = (170.58, 3643.84) 
[Sun Aug 26 04:56:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 04:56:31 2012] grppha failed
[Sun Aug 26 04:56:31 2012] Setting source spectrum file to fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src23_src.pi.gz
[Sun Aug 26 04:56:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Aug 26 04:58:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 26 04:58:34 2012] rmf not generated due to insufficient counts
[Sun Aug 26 04:59:58 2012] Updating aperture counts using extracted products
[Sun Aug 26 04:59:58 2012] Error reading totcts from fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src23_src.pi.gz
[Sun Aug 26 04:59:59 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 05:00:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 05:00:02 2012] xmm0604920301/analysis//spectral/fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete