[Sun Aug 26 00:12:21 2012] Detection parameters:
  Position = (169.7, 381.3) = 20 51 41.19 35 42 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.6 +/- 16.5
  Background counts = 47.2
  Rate = 0.002 +/- 0.0003

[Sun Aug 26 00:12:21 2012] Off-axis axis estimate = 11.10'
[Sun Aug 26 01:38:13 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 01:38:13 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Sun Aug 26 01:38:13 2012] source mask rpix=2.8, npix_max = 42, mask sum = 40, frac = 0.944
[Sun Aug 26 01:38:13 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.98"
[Sun Aug 26 02:11:58 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_src18.ximg exists
[Sun Aug 26 02:11:58 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Aug 26 02:11:58 2012] Fit fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_src18 appears to have run properly
[Sun Aug 26 02:11:59 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Aug 26 02:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Aug 26 02:11:59 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Aug 26 02:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Aug 26 02:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 02:12:16 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.604163 pixels away
[Sun Aug 26 02:12:16 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 02:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 02:12:16 2012] Assessing source extent using major
[Sun Aug 26 02:12:16 2012] Source does appear to be extended
[Sun Aug 26 02:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 03:32:14 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 03:32:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 26 03:32:14 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Sun Aug 26 03:32:14 2012] source mask rpix=2.8, npix_max = 42, mask sum = 40, frac = 0.944
[Sun Aug 26 03:32:14 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 11.98"
[Sun Aug 26 04:03:55 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src18.ximg exists
[Sun Aug 26 04:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src18.csv
[Sun Aug 26 04:03:55 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Aug 26 04:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src18.csv
[Sun Aug 26 04:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 04:03:55 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Aug 26 04:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Aug 26 04:03:55 2012] fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Aug 26 04:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Aug 26 04:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 04:04:13 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.611680 pixels away
[Sun Aug 26 04:04:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 04:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 04:04:13 2012] Assessing source extent using major
[Sun Aug 26 04:04:13 2012] Source does appear to be extended
[Sun Aug 26 04:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 04:50:31 2012] XMMSAS src. selection expression = ellipse(14712.848251, 33126.688446, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 26 04:50:31 2012] Writing source region out to fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src10_src.reg
[Sun Aug 26 04:50:31 2012] Extracting stamp from image fullrun_mos2_xmm0604920301_pi300-10000_cl_sm2.00.img.gz, (132, 344) - (207, 419)
[Sun Aug 26 04:50:31 2012] XMMSAS bgd. selection expression = annulus(14712.848251, 33126.688446, 1087.500000, 2175.000000, X, Y) && !ellipse(15587.533051, 31691.172516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14749.066833, 35507.875366, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 26 04:50:31 2012] Writing fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src10.gif
[Sun Aug 26 04:55:27 2012] Mean detx,y = (-11218.89, -6407.29) 
[Sun Aug 26 04:55:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 04:55:50 2012] grppha failed
[Sun Aug 26 04:55:51 2012] Setting source spectrum file to fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src10_src.pi.gz
[Sun Aug 26 04:55:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Aug 26 04:58:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 26 04:58:33 2012] rmf not generated due to insufficient counts
[Sun Aug 26 04:59:58 2012] Updating aperture counts using extracted products
[Sun Aug 26 04:59:58 2012] Error reading totcts from fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src10_src.pi.gz
[Sun Aug 26 04:59:59 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 05:00:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 05:00:02 2012] xmm0604920301/analysis//spectral/fullrun_mos2_xmm0604920301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete