[Thu Jun 13 17:12:48 2013] Detection parameters:
  Position = (294.7, 290.8) = 16 37 50.81 -55 44 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1251.7 +/- 51.6
  Background counts = 391.5
  Rate = 0.02 +/- 0.001

[Thu Jun 13 17:12:48 2013] Off-axis axis estimate = 0.62'
[Thu Jun 13 17:17:08 2013] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:17:08 2013] Initial guess for spatial extent in simple fitting = 6.74"
[Thu Jun 13 17:17:08 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.953
[Thu Jun 13 17:17:08 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 6.74"
[Thu Jun 13 17:50:03 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 13 17:50:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 17:50:03 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 13 17:50:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 17:50:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:50:04 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 13 17:50:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 17:50:04 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 13 17:50:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 17:50:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 18:45:53 2013] Source 4 is offset by 5.885988 and -7.440981 pixels which is larger than
2 X fitted extent = 0.774529 x 0.774529, not incorporating fit results
[Thu Jun 13 18:45:53 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 18:45:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 18:45:53 2013] Assessing source extent using major
[Thu Jun 13 18:45:53 2013] Source does appear to be extended
[Thu Jun 13 18:45:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 18:46:12 2013] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 18:46:12 2013] Initial guess for spatial extent in simple fitting = 6.74"
[Thu Jun 13 18:46:12 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.953
[Thu Jun 13 18:46:12 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 6.74"
[Thu Jun 13 19:14:55 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun 13 19:14:55 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun 13 19:14:55 2013] Fit fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Jun 13 19:14:55 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun 13 19:14:55 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun 13 19:14:55 2013] Fit fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jun 13 20:14:28 2013] Spatial fit model total counts = 1467.480000, observed total counts = 1395.000000
[Thu Jun 13 20:14:28 2013] Offset between fit and detection position for source 4 = 0.099601 pixels
[Thu Jun 13 20:14:28 2013] 1466.458000 total counts/ 979.575000 bgd. counts: snr = 15.556280
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.099601 pixels
  Position = (294.7, 290.7) = 16 37 50.82 -55 44 30.4
  Extent = 5.5 (4.9-6.0)", rotation angle = 0
  Source counts = 486.9 +/- 38.3
  Background counts = 979.6
  Rate = 0.01 +/- 0.001
[Thu Jun 13 20:14:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 20:14:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 20:14:28 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 20:14:28 2013] Source does appear to be extended
[Thu Jun 13 20:14:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 20:14:48 2013] XMMSAS src. selection expression = ellipse(25588.291200, 25238.627400, 329.893209, 329.893209, 0.000000, X, Y)
[Thu Jun 13 20:14:48 2013] Writing source region out to fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src4_src.reg
[Thu Jun 13 20:14:48 2013] Extracting stamp from image fullrun_pn_xmm0604920201_pi300-10000_cl_sm2.00.img.gz, (276, 272) - (314, 310)
[Thu Jun 13 20:14:48 2013] XMMSAS bgd. selection expression = annulus(25588.291200, 25238.627400, 549.822016, 1099.644032, X, Y)
[Thu Jun 13 20:14:48 2013] Writing fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src4.gif
[Thu Jun 13 20:18:47 2013] Mean detx,y = (-1459.45, 2112.26) 
[Thu Jun 13 20:18:50 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 20:19:06 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 20:19:07 2013] Setting source spectrum file to fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jun 13 20:19:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jun 13 21:46:33 2013] Updating aperture counts using extracted products
[Thu Jun 13 21:46:33 2013] Total counts from fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 668.00
[Thu Jun 13 21:46:33 2013] Total counts from fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1046.00
[Thu Jun 13 21:46:33 2013] Got source and background scale factors 347200.000000, 2409852.000000
[Thu Jun 13 21:46:33 2013] User source parameters:
  Position = (294.7, 290.7) = 16 37 50.82 -55 44 30.4
  Extent = 5.5 (4.9-6.0)", rotation angle = 0
  Source aperture counts = 517.3 +/- 26.9
  Background aperture counts = 150.7
  Rate = 0.01 +/- 0.0007

[Thu Jun 13 21:46:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 21:46:38 2013] Using photon index=1.80, rate=0.0122, arf fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src4.arf
[Thu Jun 13 21:46:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 21:46:38 2013] Updating source flux to 6.4e-14
[Thu Jun 13 21:46:55 2013] Flag b found in src. 4 procflags, skipping spectral fitting
[Thu Jun 13 21:46:59 2013] xmm0604920201/analysis//spectral/fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete