[Thu Jun 13 17:12:48 2013] Detection parameters:
  Position = (214.6, 328.2) = 16 38 32.01 -55 41 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 312.7 +/- 25.2
  Background counts = 362.4
  Rate = 0.005 +/- 0.0004

[Thu Jun 13 17:12:48 2013] Off-axis axis estimate = 6.45'
[Thu Jun 13 17:17:08 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:17:08 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Thu Jun 13 17:17:08 2013] source mask rpix=2.2, npix_max = 29, mask sum = 18, frac = 0.609
[Thu Jun 13 17:17:08 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.65"
[Thu Jun 13 17:50:04 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jun 13 17:50:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src18.csv
[Thu Jun 13 17:50:04 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jun 13 17:50:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src18.csv
[Thu Jun 13 17:50:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:50:04 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jun 13 17:50:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 13 17:50:04 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jun 13 17:50:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 13 17:50:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 18:45:53 2013] Spatial fit model total counts = -1501.840000, observed total counts = 654.000000
[Thu Jun 13 18:45:53 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 18:45:53 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 18:45:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 18:45:53 2013] Assessing source extent using major
[Thu Jun 13 18:45:53 2013] Source does appear to be extended
[Thu Jun 13 18:45:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 18:46:12 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 18:46:12 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Thu Jun 13 18:46:12 2013] source mask rpix=2.2, npix_max = 29, mask sum = 18, frac = 0.609
[Thu Jun 13 18:46:12 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.65"
[Thu Jun 13 19:14:55 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src18.ximg exists
[Thu Jun 13 19:14:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src18.csv
[Thu Jun 13 19:14:55 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Jun 13 19:14:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src18.csv
[Thu Jun 13 19:14:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 19:14:55 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Jun 13 19:14:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Jun 13 19:14:55 2013] fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Jun 13 19:14:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Jun 13 19:14:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 20:14:28 2013] Source 18 is offset by -5.909365 and 6.233463 pixels which is larger than
2 X fitted extent = 2.036841 x 2.036841, not incorporating fit results
[Thu Jun 13 20:14:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 20:14:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 20:14:28 2013] Assessing source extent using major
[Thu Jun 13 20:14:28 2013] Source does appear to be extended
[Thu Jun 13 20:14:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 20:14:48 2013] XMMSAS src. selection expression = ellipse(18623.827209, 28500.735321, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 20:14:48 2013] Writing source region out to fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src18_src.reg
[Thu Jun 13 20:14:48 2013] Extracting stamp from image fullrun_pn_xmm0604920201_pi300-10000_cl_sm2.00.img.gz, (177, 291) - (252, 366)
[Thu Jun 13 20:14:48 2013] XMMSAS bgd. selection expression = annulus(18623.827209, 28500.735321, 1087.500000, 2175.000000, X, Y) && !ellipse(16687.680283, 29770.237579, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 20:14:48 2013] Writing fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src18.gif
[Thu Jun 13 20:28:08 2013] Mean detx,y = (-8218.79, -1849.17) 
[Thu Jun 13 20:28:13 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 20:28:50 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 20:28:51 2013] Setting source spectrum file to fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jun 13 20:28:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jun 13 20:47:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 20:47:01 2013] rmf not generated due to insufficient counts
[Thu Jun 13 21:46:36 2013] Updating aperture counts using extracted products
[Thu Jun 13 21:46:36 2013] Total counts from fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 457.00
[Thu Jun 13 21:46:36 2013] Total counts from fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 3002.00
[Thu Jun 13 21:46:36 2013] Got source and background scale factors 867105.000000, 8603581.000000
[Thu Jun 13 21:46:36 2013] User source parameters:
  Position = (214.6, 328.2) = 16 38 32.01 -55 41 46.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 154.4 +/- 22.4
  Background aperture counts = 302.6
  Rate = 0.004 +/- 0.0006

[Thu Jun 13 21:46:36 2013] Updating counts from extracted products
[Thu Jun 13 21:46:36 2013] Set source signif. to 154.45/17.39 = 8.88
[Thu Jun 13 21:46:39 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 21:46:39 2013] Using photon index=1.80, rate=0.00388, arf fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src18.arf
[Thu Jun 13 21:46:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 21:46:39 2013] Updating source flux to 3.3e-14
[Thu Jun 13 21:46:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 21:46:59 2013] xmm0604920201/analysis//spectral/fullrun_pn_xmm0604920201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete