[Thu Jun 13 17:13:25 2013] Detection parameters:
  Position = (293.7, 499.3) = 16 37 51.30 -55 29 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.4 +/- 18.3
  Background counts = 37.1
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 17:13:26 2013] Off-axis axis estimate = 14.57'
[Thu Jun 13 18:16:56 2013] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 18:16:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 18:16:56 2013] Initial guess for spatial extent in simple fitting = 13.71"
[Thu Jun 13 18:16:56 2013] source mask rpix=3.2, npix_max = 53, mask sum = 43, frac = 0.806
[Thu Jun 13 18:16:56 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 13.71"
[Thu Jun 13 18:45:46 2013] fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jun 13 18:45:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_src13.csv
[Thu Jun 13 18:45:46 2013] fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jun 13 18:45:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_src13.csv
[Thu Jun 13 18:45:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 18:45:46 2013] fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jun 13 18:45:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jun 13 18:45:46 2013] fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jun 13 18:45:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jun 13 18:45:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 18:46:02 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.843677 pixels away
[Thu Jun 13 18:46:02 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 18:46:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 18:46:02 2013] Assessing source extent using major
[Thu Jun 13 18:46:02 2013] Source does appear to be extended
[Thu Jun 13 18:46:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 19:45:08 2013] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:45:08 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 19:45:08 2013] Initial guess for spatial extent in simple fitting = 13.71"
[Thu Jun 13 19:45:08 2013] source mask rpix=3.2, npix_max = 53, mask sum = 43, frac = 0.806
[Thu Jun 13 19:45:08 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.71"
[Thu Jun 13 20:14:21 2013] fullrun_mos2_xmm0604920201_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 13 20:14:21 2013] fullrun_mos2_xmm0604920201_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 13 20:14:21 2013] Fit fullrun_mos2_xmm0604920201_pi300-10000_cl_pass1_src13 appears to have run properly
[Thu Jun 13 20:14:21 2013] fullrun_mos2_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 13 20:14:21 2013] fullrun_mos2_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 13 20:14:21 2013] Fit fullrun_mos2_xmm0604920201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jun 13 20:14:37 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.645089 pixels away
[Thu Jun 13 20:14:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 20:14:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 20:14:37 2013] Assessing source extent using major
[Thu Jun 13 20:14:37 2013] Source does appear to be extended
[Thu Jun 13 20:14:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 21:22:47 2013] XMMSAS src. selection expression = ellipse(25503.735596, 43391.461823, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 21:22:47 2013] Writing source region out to fullrun_mos2_xmm0604920201_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 21:22:47 2013] Extracting stamp from image fullrun_mos2_xmm0604920201_pi300-10000_cl_sm2.00.img.gz, (256, 462) - (331, 537)
[Thu Jun 13 21:22:47 2013] XMMSAS bgd. selection expression = annulus(25503.735596, 43391.461823, 1087.500000, 2175.000000, X, Y) && !ellipse(27296.605194, 43849.504822, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 21:22:47 2013] Writing fullrun_mos2_xmm0604920201_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 21:26:47 2013] Mean detx,y = (-87.04, 15787.38) 
[Thu Jun 13 21:26:48 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 21:27:10 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 21:27:11 2013] Setting source spectrum file to fullrun_mos2_xmm0604920201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 21:27:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604920201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 21:43:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 21:43:00 2013] rmf not generated due to insufficient counts
[Thu Jun 13 21:46:45 2013] Updating aperture counts using extracted products
[Thu Jun 13 21:46:45 2013] Total counts from fullrun_mos2_xmm0604920201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 388.00
[Thu Jun 13 21:46:45 2013] Total counts from fullrun_mos2_xmm0604920201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1345.00
[Thu Jun 13 21:46:45 2013] Got source and background scale factors 1114940.000000, 5698195.000000
[Thu Jun 13 21:46:45 2013] User source parameters:
  Position = (293.7, 499.3) = 16 37 51.30 -55 29 20.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 124.8 +/- 20.7
  Background aperture counts = 263.2
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 21:46:45 2013] Updating counts from extracted products
[Thu Jun 13 21:46:45 2013] Set source signif. to 124.83/16.22 = 7.69
[Thu Jun 13 21:46:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 21:46:48 2013] Using photon index=1.80, rate=0.00182, arf fullrun_mos2_xmm0604920201_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 21:46:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 21:46:48 2013] Updating source flux to 8.9e-14
[Thu Jun 13 21:46:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 21:46:55 2013] xmm0604920201/analysis//spectral/fullrun_mos2_xmm0604920201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete