[Sun Jan  1 06:53:14 2012] Detection parameters:
  Position = (298.6, 230.3) = 17 8 33.05 -17 29 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 11.3
  Background counts = 30.9
  Rate = 0.001 +/- 0.0002

[Sun Jan  1 06:53:14 2012] Off-axis axis estimate = 4.94'
[Sun Jan  1 08:58:46 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 08:58:46 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Sun Jan  1 08:58:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.965
[Sun Jan  1 08:58:46 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.90"
[Sun Jan  1 10:08:49 2012] fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_src27.ximg exists
[Sun Jan  1 10:08:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_src27.csv
[Sun Jan  1 10:08:49 2012] fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Jan  1 10:08:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_src27.csv
[Sun Jan  1 10:08:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 10:08:49 2012] fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Jan  1 10:08:49 2012] fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Jan  1 10:08:49 2012] Fit fullrun_mos2_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Jan  1 10:09:16 2012] Spatial fit model total counts = 353.653000, observed total counts = 354.000000
[Sun Jan  1 10:09:16 2012] Offset between fit and detection position for source 21 = 0.382107 pixels
[Sun Jan  1 10:09:16 2012] 345.208100 total counts/ 295.754000 bgd. counts: snr = 2.875656
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.382107 pixels
  Position = (298.2, 230.3) = 17 8 33.17 -17 29 58.1
  Extent = 7.8 (2.2-14.2)", rotation angle = 0
  Source counts = 49.5 +/- 18.6
  Background counts = 295.8
  Rate = 0.0008 +/- 0.0003
[Sun Jan  1 10:09:16 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 10:09:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 10:09:16 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 10:09:16 2012] Source does appear to be extended
[Sun Jan  1 10:09:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 12:06:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 12:06:22 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Sun Jan  1 12:06:22 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.187
[Sun Jan  1 12:06:22 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 7.81"
[Sun Jan  1 13:13:35 2012] fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_src26.ximg exists
[Sun Jan  1 13:13:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_src26.csv
[Sun Jan  1 13:13:35 2012] fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Jan  1 13:13:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_src26.csv
[Sun Jan  1 13:13:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:13:35 2012] fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Jan  1 13:13:35 2012] fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Jan  1 13:13:35 2012] Fit fullrun_mos2_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Jan  1 13:13:58 2012] Warning, spatial fit 26 centroid is now closest to src. 24
[Sun Jan  1 13:13:58 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 13:13:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 13:13:58 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 13:13:58 2012] Source does appear to be extended
[Sun Jan  1 13:13:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 14:48:18 2012] XMMSAS src. selection expression = ellipse(25896.266240, 19990.296200, 468.402013, 468.402013, 0.000000, X, Y)
[Sun Jan  1 14:48:18 2012] Writing source region out to fullrun_mos2_xmm0604920101_pi300-10000_pass1_cl_src21_src.reg
[Sun Jan  1 14:48:18 2012] Extracting stamp from image fullrun_mos2_xmm0604920101_pi300-10000_cl_sm2.00.img.gz, (271, 203) - (325, 257)
[Sun Jan  1 14:48:18 2012] XMMSAS bgd. selection expression = annulus(25896.266240, 19990.296200, 780.670022, 1561.340045, X, Y) && !ellipse(25860.824700, 18854.290000, 524.928815, 244.061607, 40.472200, X, Y)
[Sun Jan  1 14:48:18 2012] Writing fullrun_mos2_xmm0604920101_pi300-10000_pass1_cl_src21.gif
[Sun Jan  1 15:03:20 2012] Mean detx,y = (631.01, 4274.00) 
[Sun Jan  1 15:03:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 15:03:38 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 15:03:38 2012] Setting source spectrum file to fullrun_mos2_xmm0604920101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jan  1 15:03:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604920101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Jan  1 15:38:57 2012] Not generating rmf since there are only 49 counts
[Sun Jan  1 15:38:57 2012] rmf not generated due to insufficient counts
[Sun Jan  1 15:41:03 2012] Updating aperture counts using extracted products
[Sun Jan  1 15:41:03 2012] Error reading totcts from fullrun_mos2_xmm0604920101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jan  1 15:41:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 15:41:05 2012] Using photon index=1.80, rate=0.000844, arf fullrun_mos2_xmm0604920101_pi300-10000_pass1_cl_src21.arf
[Sun Jan  1 15:41:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 15:41:05 2012] Updating source flux to 1.1e-14
[Sun Jan  1 15:41:37 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting