[Sun Jan  1 06:52:45 2012] Detection parameters:
  Position = (139.8, 153.1) = 17 9 21.35 -17 35 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.5 +/- 15.8
  Background counts = 31.3
  Rate = 0.002 +/- 0.0003

[Sun Jan  1 06:52:46 2012] Off-axis axis estimate = 15.60'
[Sun Jan  1 07:56:47 2012] Using EEF radius (= 14.23 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 07:56:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 07:56:47 2012] Initial guess for spatial extent in simple fitting = 14.23"
[Sun Jan  1 07:56:47 2012] source mask rpix=3.3, npix_max = 56, mask sum = 55, frac = 0.967
[Sun Jan  1 07:56:47 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 14.23"
[Sun Jan  1 08:58:46 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jan  1 08:58:46 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jan  1 08:58:46 2012] Fit fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src7 appears to have run properly
[Sun Jan  1 08:58:46 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jan  1 08:58:46 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jan  1 08:58:46 2012] Fit fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Jan  1 10:09:06 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 18.575331 pixels away
[Sun Jan  1 10:09:06 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 10:09:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 10:09:06 2012] Assessing source extent using major
[Sun Jan  1 10:09:06 2012] Source does appear to be extended
[Sun Jan  1 10:09:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 11:07:17 2012] Using EEF radius (= 14.23 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:07:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 11:07:17 2012] Initial guess for spatial extent in simple fitting = 14.23"
[Sun Jan  1 11:07:17 2012] source mask rpix=3.3, npix_max = 56, mask sum = 55, frac = 0.967
[Sun Jan  1 11:07:17 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 14.23"
[Sun Jan  1 12:06:21 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src7.ximg exists
[Sun Jan  1 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src7.csv
[Sun Jan  1 12:06:21 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Jan  1 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src7.csv
[Sun Jan  1 12:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 12:06:22 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Jan  1 12:06:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Jan  1 12:06:22 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jan  1 12:06:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Jan  1 12:06:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:13:51 2012] Spatial fit model total counts = 404.607000, observed total counts = 451.000000
[Sun Jan  1 13:13:51 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jan  1 13:13:51 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 13:13:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 13:13:51 2012] Assessing source extent using major
[Sun Jan  1 13:13:51 2012] Source does appear to be extended
[Sun Jan  1 13:13:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 14:23:48 2012] XMMSAS src. selection expression = ellipse(12118.258041, 13267.705185, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 14:23:48 2012] Writing source region out to fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src4_src.reg
[Sun Jan  1 14:23:48 2012] Extracting stamp from image fullrun_mos1_xmm0604920101_pi300-10000_cl_sm2.00.img.gz, (102, 116) - (177, 191)
[Sun Jan  1 14:23:48 2012] XMMSAS bgd. selection expression = annulus(12118.258041, 13267.705185, 1087.500000, 2175.000000, X, Y) && !ellipse(14784.998672, 10654.164703, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 14:23:48 2012] Writing fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src4.gif
[Sun Jan  1 14:26:21 2012] Mean detx,y = (9847.77, 13441.64) 
[Sun Jan  1 14:26:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 14:26:52 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 14:26:52 2012] Setting source spectrum file to fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jan  1 14:26:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jan  1 14:46:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 14:46:09 2012] rmf not generated due to insufficient counts
[Sun Jan  1 15:41:00 2012] Updating aperture counts using extracted products
[Sun Jan  1 15:41:00 2012] Error reading totcts from fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jan  1 15:41:01 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 15:41:01 2012] Using photon index=1.80, rate=0.0019, arf fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src4.arf
[Sun Jan  1 15:41:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 15:41:01 2012] Updating source flux to 5.3e-14
[Sun Jan  1 15:41:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting