[Sun Jan  1 06:52:46 2012] Detection parameters:
  Position = (217.2, 173.4) = 17 8 57.81 -17 34 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 11.2
  Background counts = 39.4
  Rate = 0.001 +/- 0.0002

[Sun Jan  1 06:52:46 2012] Off-axis axis estimate = 10.81'
[Sun Jan  1 07:56:47 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 07:56:47 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Sun Jan  1 07:56:47 2012] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.844
[Sun Jan  1 07:56:47 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.83"
[Sun Jan  1 08:58:46 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src22.ximg exists
[Sun Jan  1 08:58:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src22.csv
[Sun Jan  1 08:58:46 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Jan  1 08:58:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src22.csv
[Sun Jan  1 08:58:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 08:58:46 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Jan  1 08:58:46 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Jan  1 08:58:46 2012] Fit fullrun_mos1_xmm0604920101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sun Jan  1 10:09:06 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.752753 pixels away
[Sun Jan  1 10:09:06 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 10:09:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 10:09:06 2012] Assessing source extent using major
[Sun Jan  1 10:09:06 2012] Source does appear to be extended
[Sun Jan  1 10:09:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 11:07:17 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:07:17 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Sun Jan  1 11:07:17 2012] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.844
[Sun Jan  1 11:07:17 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.83"
[Sun Jan  1 12:06:21 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jan  1 12:06:21 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jan  1 12:06:21 2012] Fit fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Jan  1 12:06:22 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jan  1 12:06:22 2012] fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jan  1 12:06:22 2012] Fit fullrun_mos1_xmm0604920101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Jan  1 13:13:51 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 11.959042 pixels away
[Sun Jan  1 13:13:51 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 13:13:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 13:13:51 2012] Assessing source extent using major
[Sun Jan  1 13:13:51 2012] Source does appear to be extended
[Sun Jan  1 13:13:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 14:23:48 2012] XMMSAS src. selection expression = ellipse(18848.775894, 15036.793686, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 14:23:48 2012] Writing source region out to fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src20_src.reg
[Sun Jan  1 14:23:48 2012] Extracting stamp from image fullrun_mos1_xmm0604920101_pi300-10000_cl_sm2.00.img.gz, (180, 136) - (255, 211)
[Sun Jan  1 14:23:49 2012] XMMSAS bgd. selection expression = annulus(18848.775894, 15036.793686, 1087.500000, 2175.000000, X, Y) && !ellipse(21571.296036, 16801.542542, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 14:23:49 2012] Writing fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src20.gif
[Sun Jan  1 14:34:37 2012] Mean detx,y = (8740.70, 6807.37) 
[Sun Jan  1 14:34:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 14:35:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 14:35:27 2012] Setting source spectrum file to fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jan  1 14:35:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Jan  1 14:48:02 2012] Not generating rmf since there are only 56 counts
[Sun Jan  1 14:48:02 2012] rmf not generated due to insufficient counts
[Sun Jan  1 15:41:01 2012] Updating aperture counts using extracted products
[Sun Jan  1 15:41:01 2012] Error reading totcts from fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jan  1 15:41:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 15:41:02 2012] Using photon index=1.80, rate=0.000959, arf fullrun_mos1_xmm0604920101_pi300-10000_pass1_cl_src20.arf
[Sun Jan  1 15:41:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 15:41:02 2012] Updating source flux to 1.7e-14
[Sun Jan  1 15:41:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting