[Fri Dec 30 16:02:20 2011] Detection parameters:
  Position = (446.3, 386.5) = 10 29 2.64 -35 12 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.0 +/- 11.8
  Background counts = 25.9
  Rate = 0.001 +/- 0.0002

[Fri Dec 30 16:02:23 2011] Off-axis axis estimate = 12.48'
[Fri Dec 30 19:27:09 2011] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 19:27:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 19:27:09 2011] Initial guess for spatial extent in simple fitting = 12.67"
[Fri Dec 30 19:27:09 2011] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.009
[Fri Dec 30 19:27:09 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 12.67"
[Fri Dec 30 20:43:58 2011] fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_src29.ximg exists
[Fri Dec 30 20:43:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_src29.csv
[Fri Dec 30 20:43:58 2011] fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Dec 30 20:43:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_src29.csv
[Fri Dec 30 20:43:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 20:43:58 2011] fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Dec 30 20:43:58 2011] fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Dec 30 20:43:58 2011] Fit fullrun_mos2_xmm0604890101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Dec 30 20:44:29 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.206816 pixels away
[Fri Dec 30 20:44:29 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 20:44:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 20:44:29 2011] Assessing source extent using major
[Fri Dec 30 20:44:29 2011] Source does appear to be extended
[Fri Dec 30 20:44:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:57:43 2011] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 23:57:43 2011] Initial guess for spatial extent in simple fitting = 12.67"
[Fri Dec 30 23:57:43 2011] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.009
[Fri Dec 30 23:57:43 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 12.67"
[Sat Dec 31 01:14:03 2011] fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_src28.ximg exists
[Sat Dec 31 01:14:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_src28.csv
[Sat Dec 31 01:14:03 2011] fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Dec 31 01:14:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_src28.csv
[Sat Dec 31 01:14:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 01:14:03 2011] fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Dec 31 01:14:03 2011] fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Dec 31 01:14:03 2011] Fit fullrun_mos2_xmm0604890101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sat Dec 31 01:14:35 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.626948 pixels away
[Sat Dec 31 01:14:35 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 01:14:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 01:14:35 2011] Assessing source extent using major
[Sat Dec 31 01:14:35 2011] Source does appear to be extended
[Sat Dec 31 01:14:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 05:12:06 2011] XMMSAS src. selection expression = ellipse(38779.872406, 33576.368103, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 05:12:06 2011] Writing source region out to fullrun_mos2_xmm0604890101_pi300-10000_pass1_cl_src4_src.reg
[Sat Dec 31 05:12:06 2011] Extracting stamp from image fullrun_mos2_xmm0604890101_pi300-10000_cl_sm2.00.img.gz, (409, 349) - (484, 424)
[Sat Dec 31 05:12:06 2011] XMMSAS bgd. selection expression = annulus(38779.872406, 33576.368103, 1087.500000, 2175.000000, X, Y)
[Sat Dec 31 05:12:06 2011] Writing fullrun_mos2_xmm0604890101_pi300-10000_pass1_cl_src4.gif
[Sat Dec 31 05:27:33 2011] Mean detx,y = (15958.88, 847.84) 
[Sat Dec 31 05:27:36 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 05:27:55 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 05:27:55 2011] Setting source spectrum file to fullrun_mos2_xmm0604890101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Dec 31 05:27:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0604890101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Dec 31 05:58:21 2011] Not generating rmf since there are only 61 counts
[Sat Dec 31 05:58:21 2011] rmf not generated due to insufficient counts
[Sat Dec 31 05:59:51 2011] Updating aperture counts using extracted products
[Sat Dec 31 05:59:51 2011] Error reading totcts from fullrun_mos2_xmm0604890101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Dec 31 05:59:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 05:59:52 2011] Using photon index=1.80, rate=0.00118, arf fullrun_mos2_xmm0604890101_pi300-10000_pass1_cl_src4.arf
[Sat Dec 31 05:59:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 05:59:52 2011] Updating source flux to 4.1e-14
[Sat Dec 31 06:03:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting