[Sun Mar 18 06:54:03 2012] Detection parameters:
  Position = (279.3, 261.4) = 15 50 58.09 -54 19 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.4 +/- 22.3
  Background counts = 100.3
  Rate = 0.006 +/- 0.0007

[Sun Mar 18 06:54:04 2012] Off-axis axis estimate = 3.02'
[Sun Mar 18 06:57:06 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 06:57:06 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Sun Mar 18 06:57:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Sun Mar 18 06:57:06 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.94"
[Sun Mar 18 08:32:35 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src18.ximg exists
[Sun Mar 18 08:32:35 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Mar 18 08:32:35 2012] Fit fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src18 appears to have run properly
[Sun Mar 18 08:32:36 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Mar 18 08:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Mar 18 08:32:36 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Mar 18 08:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Mar 18 08:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:13 2012] Spatial fit model total counts = 1926.440000, observed total counts = 2023.000000
[Sun Mar 18 10:53:13 2012] Offset between fit and detection position for source 20 = 2.160237 pixels
[Sun Mar 18 10:53:13 2012] 1672.830000 total counts/ 543.530000 bgd. counts: snr = 48.439268
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.160237 pixels
  Position = (281.4, 261.2) = 15 50 57.02 -54 19 33.5
  Extent = 15.9 (15.9-31.8)" x 11.5 (11.5-11.5)", rotation angle = 90 (90-90) degrees
  Source counts = 1129.3 +/- 40.9
  Background counts = 543.5
  Rate = 0.03 +/- 0.001
[Sun Mar 18 10:53:13 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 10:53:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 10:53:13 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 10:53:13 2012] Source does appear to be extended
[Sun Mar 18 10:53:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Sun Mar 18 10:53:13 2012] Source is confused with source 14
[Sun Mar 18 10:53:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 10:53:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 18 10:53:47 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Sun Mar 18 10:53:47 2012] source mask rpix=3.1, npix_max = 53, mask sum = 20, frac = 0.376
[Sun Mar 18 10:53:47 2012] Skipping simple spatial due to low active detector fraction
[Sun Mar 18 14:27:38 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:27:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:27:38 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 14:27:38 2012] Source does appear to be extended
[Sun Mar 18 14:27:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Sun Mar 18 14:28:02 2012] Counts = 1129.300000, rescaling region sizes by 2.000000
[Sun Mar 18 14:28:02 2012] XMMSAS src. selection expression = ellipse(24435.162000, 22678.545600, 1905.804055, 1378.860040, 89.564000, X, Y)
[Sun Mar 18 14:28:02 2012] Writing source region out to fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src20_src.reg
[Sun Mar 18 14:28:02 2012] Extracting stamp from image fullrun_pn_xmm0604880101_pi300-10000_cl_sm2.00.img.gz, (172, 152) - (391, 371)
[Sun Mar 18 14:28:02 2012] XMMSAS bgd. selection expression = annulus(24435.162000, 22678.545600, 6352.680183, 12705.360366, X, Y) && !ellipse(24931.534320, 24076.778600, 1426.449641, 1426.449641, 0.000000, X, Y) && !ellipse(35868.344200, 26356.692800, 447.344813, 447.344813, 0.000000, X, Y) && !ellipse(37630.218170, 22403.938446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14991.808197, 26308.886505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28277.213715, 22918.525604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22561.692322, 22615.953156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.995941, 22928.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21123.456314, 19766.697845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18944.601000, 27453.375400, 462.471213, 462.471213, 0.000000, X, Y) && !ellipse(18735.314545, 30634.794769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14001.923004, 23180.879669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23552.522705, 22687.638947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24828.404999, 22835.181580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31179.235077, 21524.920639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.055664, 29425.758148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17999.990200, 28543.115600, 1064.488031, 425.969612, 320.080118, X, Y) && !ellipse(23088.782013, 23551.787262, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 14:28:02 2012] Writing fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src20.gif
[Sun Mar 18 15:02:08 2012] Mean detx,y = (192.77, -397.03) 
[Sun Mar 18 15:02:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 15:08:43 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 15:08:43 2012] Setting source spectrum file to fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Mar 18 15:08:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Mar 18 18:08:32 2012] Updating aperture counts using extracted products
[Sun Mar 18 18:08:32 2012] Error reading totcts from fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Mar 18 18:08:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:08:33 2012] Using photon index=1.80, rate=0.0273, arf fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src20.arf
[Sun Mar 18 18:08:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:08:33 2012] Updating source flux to 1.5e-13
[Sun Mar 18 18:10:45 2012] Flag c found in src. 20 procflags, skipping spectral fitting