[Sun Mar 18 06:54:02 2012] Detection parameters:
  Position = (287.2, 277.2) = 15 50 54.16 -54 18 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80070.5 +/- 338.1
  Background counts = 104.0
  Rate = 2 +/- 0.009

[Sun Mar 18 06:54:04 2012] Off-axis axis estimate = 1.75'
[Sun Mar 18 06:57:06 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 06:57:06 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 06:57:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Mar 18 06:57:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun Mar 18 08:32:35 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 08:32:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 08:32:35 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 08:32:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 08:32:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 08:32:36 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 08:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 18 08:32:36 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 08:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 18 08:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:13 2012] Spatial fit model total counts = 55713.500000, observed total counts = 74500.000000
[Sun Mar 18 10:53:13 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 10:53:13 2012] Source 1 is offset by 4.212629 and 3.209181 pixels which is larger than
2 X fitted extent = 1.493508 x 1.493508, not incorporating fit results
[Sun Mar 18 10:53:13 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 10:53:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 10:53:13 2012] Assessing source extent using major
[Sun Mar 18 10:53:13 2012] Source does appear to be extended
[Sun Mar 18 10:53:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 10:53:47 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 10:53:47 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 10:53:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Mar 18 10:53:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Sun Mar 18 12:14:24 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 12:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 12:14:24 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 12:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 12:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 12:14:24 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 12:14:24 2012] fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 12:14:24 2012] Fit fullrun_pn_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 14:27:38 2012] Spatial fit model total counts = 74902.800000, observed total counts = 74500.000000
[Sun Mar 18 14:27:38 2012] Offset between fit and detection position for source 1 = 0.148728 pixels
[Sun Mar 18 14:27:38 2012] 75107.700000 total counts/ 20739.300000 bgd. counts: snr = 377.528294
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.148728 pixels
  Position = (287.1, 277.3) = 15 50 54.18 -54 18 23.6
  Extent = 5.9 (5.9-6.0)", rotation angle = 0
  Source counts = 54368.4 +/- 274.1
  Background counts = 20739.3
  Rate = 1 +/- 0.007
[Sun Mar 18 14:27:38 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:27:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:27:38 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 14:27:38 2012] Source does appear to be extended
[Sun Mar 18 14:27:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 14:28:02 2012] Counts = 54368.400000, rescaling region sizes by 3.000000
[Sun Mar 18 14:28:02 2012] XMMSAS src. selection expression = ellipse(24931.534320, 24076.778600, 1069.837231, 1069.837231, 0.000000, X, Y)
[Sun Mar 18 14:28:02 2012] Writing source region out to fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 18 14:28:02 2012] Extracting stamp from image fullrun_pn_xmm0604880101_pi300-10000_cl_sm2.00.img.gz, (226, 216) - (349, 339)
[Sun Mar 18 14:28:02 2012] XMMSAS bgd. selection expression = annulus(24931.534320, 24076.778600, 5349.186154, 10698.372308, X, Y) && !ellipse(35868.344200, 26356.692800, 447.344813, 447.344813, 0.000000, X, Y) && !ellipse(14991.808197, 26308.886505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28277.213715, 22918.525604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22561.692322, 22615.953156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.995941, 22928.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21123.456314, 19766.697845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18944.601000, 27453.375400, 462.471213, 462.471213, 0.000000, X, Y) && !ellipse(18735.314545, 30634.794769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14001.923004, 23180.879669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23552.522705, 22687.638947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24828.404999, 22835.181580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31179.235077, 21524.920639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.162000, 22678.545600, 1270.536037, 919.240026, 89.564000, X, Y) && !ellipse(26137.055664, 29425.758148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17999.990200, 28543.115600, 1064.488031, 425.969612, 320.080118, X, Y) && !ellipse(23088.782013, 23551.787262, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 14:28:02 2012] Writing fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1.gif
[Sun Mar 18 14:29:26 2012] Mean detx,y = (99.97, -245.39) 
[Sun Mar 18 14:29:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 14:34:37 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 14:34:38 2012] Setting source spectrum file to fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 14:34:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 18 18:08:31 2012] Updating aperture counts using extracted products
[Sun Mar 18 18:08:31 2012] Error reading totcts from fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 18:08:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:08:32 2012] Using photon index=1.80, rate=1.31, arf fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 18:08:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:08:32 2012] Updating source flux to 3.1e-12
[Sun Mar 18 18:10:45 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Mar 18 18:10:45 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Sun Mar 18 18:14:07 2012] Reading fit data from xmm0604880101/analysis//spectral/fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 18 18:14:07 2012] Spectral fit parameter nH value = 5.19386e+22
[Sun Mar 18 18:14:07 2012] Spectral fit parameter PhoIndex value = 3.71383
[Sun Mar 18 18:14:07 2012] Failed to get F(0.3-8.0) from xmm0604880101/analysis//spectral/fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 18 18:14:07 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:14:07 2012] Using Nh = 5.2e+22, photon index=3.71, rate=1.31, arf fullrun_pn_xmm0604880101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 18:14:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:14:07 2012] Updating source flux to 7.8e-12