[Sun Mar 18 06:54:07 2012] Detection parameters:
  Position = (278.1, 269.0) = 15 50 58.65 -54 18 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.5 +/- 21.3
  Background counts = 35.4
  Rate = 0.005 +/- 0.0006

[Sun Mar 18 06:54:07 2012] Off-axis axis estimate = 2.59'
[Sun Mar 18 09:26:35 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 09:26:35 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Mar 18 09:26:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.676
[Sun Mar 18 09:26:35 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.72"
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src9.csv
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src9.csv
[Sun Mar 18 10:53:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:03 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Mar 18 10:53:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Mar 18 10:53:03 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Mar 18 10:53:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Mar 18 10:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:31 2012] Warning, spatial fit 9 centroid is now closest to src. 1
[Sun Mar 18 10:53:31 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 10:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 10:53:31 2012] Assessing source extent using major
[Sun Mar 18 10:53:31 2012] Source does appear to be extended
[Sun Mar 18 10:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 12:35:33 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 12:35:33 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Mar 18 12:35:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.676
[Sun Mar 18 12:35:33 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.72"
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src9.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src9.csv
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src9.csv
[Sun Mar 18 14:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Mar 18 14:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:27:50 2012] Warning, spatial fit 9 centroid is now closest to src. 1
[Sun Mar 18 14:27:50 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:27:50 2012] Assessing source extent using major
[Sun Mar 18 14:27:50 2012] Source does appear to be extended
[Sun Mar 18 14:27:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 17:13:33 2012] XMMSAS src. selection expression = ellipse(24149.551178, 23355.654938, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 17:13:33 2012] Writing source region out to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src24_src.reg
[Sun Mar 18 17:13:33 2012] Extracting stamp from image fullrun_mos2_xmm0604880101_pi300-10000_cl_sm2.00.img.gz, (241, 232) - (316, 307)
[Sun Mar 18 17:13:33 2012] XMMSAS bgd. selection expression = annulus(24149.551178, 23355.654938, 1087.500000, 2175.000000, X, Y) && !ellipse(24928.342957, 24069.695862, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24113.695007, 26035.885773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.494415, 24130.896942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24067.290405, 24557.108795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22533.061600, 22846.076200, 301.942409, 168.382405, 30.214000, X, Y) && !ellipse(26983.514000, 23456.536000, 1168.024034, 1168.024034, 0.000000, X, Y) && !ellipse(24128.236603, 22646.270935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23440.408783, 25696.299561, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 17:13:33 2012] Writing fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src24.gif
[Sun Mar 18 17:28:43 2012] Mean detx,y = (-655.11, 643.72) 
[Sun Mar 18 17:28:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 17:29:03 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 17:29:03 2012] Setting source spectrum file to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Mar 18 17:29:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Mar 18 17:43:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 18 17:43:27 2012] rmf not generated due to insufficient counts
[Sun Mar 18 18:08:34 2012] Updating aperture counts using extracted products
[Sun Mar 18 18:08:34 2012] Error reading totcts from fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Mar 18 18:08:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:08:36 2012] Using photon index=1.80, rate=0.00475, arf fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src24.arf
[Sun Mar 18 18:08:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:08:36 2012] Updating source flux to 5e-14
[Sun Mar 18 18:09:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting