[Sun Mar 18 06:54:07 2012] Detection parameters:
  Position = (399.7, 181.4) = 15 49 58.11 -54 25 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.3 +/- 10.4
  Background counts = 18.8
  Rate = 0.001 +/- 0.0002

[Sun Mar 18 06:54:07 2012] Off-axis axis estimate = 11.22'
[Sun Mar 18 09:26:35 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 09:26:35 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Sun Mar 18 09:26:35 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.147
[Sun Mar 18 09:26:35 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.04"
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src28.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src28.csv
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src28.csv
[Sun Mar 18 10:53:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:03 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Mar 18 10:53:03 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Mar 18 10:53:03 2012] Fit fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Mar 18 10:53:31 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.596839 pixels away
[Sun Mar 18 10:53:31 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 10:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 10:53:31 2012] Assessing source extent using major
[Sun Mar 18 10:53:31 2012] Source does appear to be extended
[Sun Mar 18 10:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 12:35:33 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 12:35:33 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Sun Mar 18 12:35:33 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.147
[Sun Mar 18 12:35:33 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 12.04"
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src28.ximg exists
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Mar 18 14:27:28 2012] Fit fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src28 appears to have run properly
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Mar 18 14:27:28 2012] Fit fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Mar 18 14:27:50 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.416834 pixels away
[Sun Mar 18 14:27:50 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:27:50 2012] Assessing source extent using major
[Sun Mar 18 14:27:50 2012] Source does appear to be extended
[Sun Mar 18 14:27:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 17:13:34 2012] XMMSAS src. selection expression = ellipse(34721.174255, 15732.192322, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 17:13:34 2012] Writing source region out to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src17_src.reg
[Sun Mar 18 17:13:34 2012] Extracting stamp from image fullrun_mos2_xmm0604880101_pi300-10000_cl_sm2.00.img.gz, (362, 144) - (437, 219)
[Sun Mar 18 17:13:34 2012] XMMSAS bgd. selection expression = annulus(34721.174255, 15732.192322, 1087.500000, 2175.000000, X, Y) && !ellipse(36548.460999, 16918.261612, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 17:13:34 2012] Writing fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src17.gif
[Sun Mar 18 17:35:43 2012] Mean detx,y = (9076.97, 9309.63) 
[Sun Mar 18 17:35:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 17:36:00 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 17:36:00 2012] Setting source spectrum file to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Mar 18 17:36:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Mar 18 18:06:55 2012] Not generating rmf since there are only 46 counts
[Sun Mar 18 18:06:55 2012] rmf not generated due to insufficient counts
[Sun Mar 18 18:08:35 2012] Updating aperture counts using extracted products
[Sun Mar 18 18:08:35 2012] Error reading totcts from fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Mar 18 18:08:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:08:37 2012] Using photon index=1.80, rate=0.00104, arf fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src17.arf
[Sun Mar 18 18:08:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:08:37 2012] Updating source flux to 2.7e-14
[Sun Mar 18 18:09:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting