[Sun Mar 18 06:54:06 2012] Detection parameters:
  Position = (301.5, 338.9) = 15 50 47.04 -54 13 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 11.6
  Background counts = 25.3
  Rate = 0.001 +/- 0.0003

[Sun Mar 18 06:54:07 2012] Off-axis axis estimate = 2.94'
[Sun Mar 18 09:26:35 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 09:26:35 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Sun Mar 18 09:26:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.932
[Sun Mar 18 09:26:35 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.90"
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src25.csv
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src25.csv
[Sun Mar 18 10:53:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:03 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Mar 18 10:53:03 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Mar 18 10:53:03 2012] Fit fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Mar 18 10:53:31 2012] Spatial fit model total counts = 278.197000, observed total counts = 278.000000
[Sun Mar 18 10:53:31 2012] Offset between fit and detection position for source 12 = 0.315675 pixels
[Sun Mar 18 10:53:31 2012] 279.183100 total counts/ 231.407000 bgd. counts: snr = 3.140671
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.315675 pixels
  Position = (301.2, 339.0) = 15 50 47.18 -54 13 55.3
  Extent = 6.9 (4.9-10.9)", rotation angle = 0
  Source counts = 47.8 +/- 16.7
  Background counts = 231.4
  Rate = 0.001 +/- 0.0004
[Sun Mar 18 10:53:31 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 10:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 10:53:31 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 10:53:31 2012] Source does appear to be extended
[Sun Mar 18 10:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 12:35:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 12:35:33 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Sun Mar 18 12:35:33 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.911
[Sun Mar 18 12:35:33 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 6.94"
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src25.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src25.csv
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src25.csv
[Sun Mar 18 14:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Mar 18 14:27:28 2012] Fit fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Mar 18 14:27:50 2012] Spatial fit model total counts = 277.283000, observed total counts = 278.000000
[Sun Mar 18 14:27:50 2012] Offset between fit and detection position for source 12 = 0.047043 pixels
[Sun Mar 18 14:27:50 2012] 278.255000 total counts/ 230.032000 bgd. counts: snr = 3.179509
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.047043 pixels
  Position = (301.2, 339.0) = 15 50 47.18 -54 13 55.1
  Extent = 7.2 (4.9-10.9)", rotation angle = 0
  Source counts = 48.2 +/- 16.7
  Background counts = 230.0
  Rate = 0.001 +/- 0.0004
[Sun Mar 18 14:27:50 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:27:50 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 14:27:50 2012] Source does appear to be extended
[Sun Mar 18 14:27:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 17:13:34 2012] XMMSAS src. selection expression = ellipse(26157.342780, 29447.366000, 433.917012, 433.917012, 0.000000, X, Y)
[Sun Mar 18 17:13:34 2012] Writing source region out to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src12_src.reg
[Sun Mar 18 17:13:34 2012] Extracting stamp from image fullrun_mos2_xmm0604880101_pi300-10000_cl_sm2.00.img.gz, (276, 314) - (326, 364)
[Sun Mar 18 17:13:34 2012] XMMSAS bgd. selection expression = annulus(26157.342780, 29447.366000, 723.195021, 1446.390042, X, Y)
[Sun Mar 18 17:13:34 2012] Writing fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src12.gif
[Sun Mar 18 17:35:03 2012] Mean detx,y = (1728.99, -5138.38) 
[Sun Mar 18 17:35:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 17:35:13 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 17:35:14 2012] Setting source spectrum file to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Mar 18 17:35:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Mar 18 18:06:33 2012] Not generating rmf since there are only 48 counts
[Sun Mar 18 18:06:33 2012] rmf not generated due to insufficient counts
[Sun Mar 18 18:08:35 2012] Updating aperture counts using extracted products
[Sun Mar 18 18:08:35 2012] Error reading totcts from fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Mar 18 18:08:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:08:36 2012] Using photon index=1.80, rate=0.00108, arf fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src12.arf
[Sun Mar 18 18:08:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:08:37 2012] Updating source flux to 1.4e-14
[Sun Mar 18 18:09:32 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting