[Sun Mar 18 06:54:06 2012] Detection parameters:
  Position = (287.1, 277.2) = 15 50 54.20 -54 18 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32457.2 +/- 213.1
  Background counts = 35.8
  Rate = 0.8 +/- 0.005

[Sun Mar 18 06:54:07 2012] Off-axis axis estimate = 1.74'
[Sun Mar 18 09:26:35 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 09:26:35 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 09:26:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Mar 18 09:26:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 10:53:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 18 10:53:02 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 10:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 18 10:53:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:31 2012] Spatial fit model total counts = 34841.800000, observed total counts = 31110.000000
[Sun Mar 18 10:53:31 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 10:53:31 2012] Source 1 is offset by 1.987298 and 0.631493 pixels which is larger than
2 X fitted extent = 0.887857 x 0.887857, not incorporating fit results
[Sun Mar 18 10:53:31 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 10:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 10:53:31 2012] Assessing source extent using major
[Sun Mar 18 10:53:31 2012] Source does appear to be extended
[Sun Mar 18 10:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 12:35:33 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 12:35:33 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 12:35:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Mar 18 12:35:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 14:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 18 14:27:28 2012] fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 18 14:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:27:50 2012] Spatial fit model total counts = 34764.500000, observed total counts = 31110.000000
[Sun Mar 18 14:27:50 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 14:27:50 2012] Spatial fit model total counts = 1196.190000, observed total counts = 3449.000000
[Sun Mar 18 14:27:50 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 14:27:50 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:27:50 2012] Assessing source extent using major
[Sun Mar 18 14:27:50 2012] Source does appear to be extended
[Sun Mar 18 14:27:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 17:13:33 2012] Counts = 32457.164062, rescaling region sizes by 3.000000
[Sun Mar 18 17:13:33 2012] XMMSAS src. selection expression = ellipse(24928.342957, 24069.695862, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Mar 18 17:13:33 2012] Writing source region out to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 18 17:13:33 2012] Extracting stamp from image fullrun_mos2_xmm0604880101_pi300-10000_cl_sm2.00.img.gz, (175, 165) - (400, 390)
[Sun Mar 18 17:13:33 2012] XMMSAS bgd. selection expression = annulus(24928.342957, 24069.695862, 9787.500000, 19575.000000, X, Y) && !ellipse(27877.313202, 37337.264893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14984.890518, 26302.931274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18706.499512, 30921.397217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24113.695007, 26035.885773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31002.568800, 32411.592200, 493.593614, 493.593614, 0.000000, X, Y) && !ellipse(24002.494415, 24130.896942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24067.290405, 24557.108795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30626.840302, 34335.302917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.551178, 23355.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21137.089000, 19741.259000, 369.436811, 227.747207, 62.016000, X, Y) && !ellipse(35866.912691, 26342.463627, 547.153439, 304.749267, 84.923289, X, Y) && !ellipse(22533.061600, 22846.076200, 301.942409, 168.382405, 30.214000, X, Y) && !ellipse(37617.913906, 22401.322530, 604.145156, 288.204899, 90.000000, X, Y) && !ellipse(28295.344000, 22853.232400, 290.513608, 290.513608, 0.000000, X, Y) && !ellipse(25255.375742, 41014.881808, 689.605620, 359.916137, 11.703362, X, Y) && !ellipse(28487.106000, 35057.475200, 430.261612, 195.645606, 215.997000, X, Y) && !ellipse(18955.869400, 27458.004400, 333.864010, 168.070405, 312.457237, X, Y) && !ellipse(33389.900085, 37266.394196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26983.514000, 23456.536000, 1168.024034, 1168.024034, 0.000000, X, Y) && !ellipse(14003.020859, 23202.648254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36548.460999, 16918.261612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.236603, 22646.270935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23440.408783, 25696.299561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26157.342780, 29447.366000, 578.556017, 578.556017, 0.000000, X, Y) && !ellipse(27780.497559, 22891.269073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34721.174255, 15732.192322, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 17:13:33 2012] Writing fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src1.gif
[Sun Mar 18 17:13:50 2012] Mean detx,y = (57.13, 93.48) 
[Sun Mar 18 17:13:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 17:25:01 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 17:25:02 2012] Setting source spectrum file to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 17:25:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 18 17:36:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 18 17:36:07 2012] rmf not generated due to insufficient counts
[Sun Mar 18 18:08:34 2012] Updating aperture counts using extracted products
[Sun Mar 18 18:08:34 2012] Error reading totcts from fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 18:08:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:08:35 2012] Using photon index=1.80, rate=0.755, arf fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 18:08:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:08:35 2012] Updating source flux to 6.7e-12
[Sun Mar 18 18:09:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Mar 18 18:10:45 2012] xmm0604880101/analysis//spectral/fullrun_mos2_xmm0604880101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete