[Sun Mar 18 06:54:05 2012] Detection parameters:
  Position = (358.6, 248.0) = 15 50 18.65 -54 20 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.0 +/- 11.1
  Background counts = 23.8
  Rate = 0.002 +/- 0.0004

[Sun Mar 18 06:54:05 2012] Off-axis axis estimate = 5.69'
[Sun Mar 18 08:32:36 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 08:32:36 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Sun Mar 18 08:32:36 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.083
[Sun Mar 18 08:32:36 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.27"
[Sun Mar 18 09:26:35 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Mar 18 09:26:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src11.csv
[Sun Mar 18 09:26:35 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Mar 18 09:26:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src11.csv
[Sun Mar 18 09:26:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 09:26:35 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Mar 18 09:26:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Mar 18 09:26:35 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Mar 18 09:26:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Mar 18 09:26:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 10:53:21 2012] Spatial fit model total counts = 283.287000, observed total counts = 235.000000
[Sun Mar 18 10:53:21 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 10:53:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 10:53:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 10:53:21 2012] Assessing source extent using major
[Sun Mar 18 10:53:21 2012] Source does appear to be extended
[Sun Mar 18 10:53:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 10:53:21 2012] Deleting source due to low Poisson probability 0.9