[Sun Mar 18 06:54:04 2012] Detection parameters:
  Position = (287.1, 277.2) = 15 50 54.21 -54 18 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32580.0 +/- 215.6
  Background counts = 37.6
  Rate = 0.7 +/- 0.005

[Sun Mar 18 06:54:05 2012] Off-axis axis estimate = 1.75'
[Sun Mar 18 08:32:36 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 08:32:36 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 08:32:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Mar 18 08:32:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun Mar 18 09:26:34 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 09:26:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 09:26:34 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 09:26:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 09:26:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 09:26:35 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 09:26:35 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 09:26:35 2012] Fit fullrun_mos1_xmm0604880101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 10:53:21 2012] Spatial fit model total counts = 31217.000000, observed total counts = 31209.000000
[Sun Mar 18 10:53:21 2012] Offset between fit and detection position for source 1 = 0.180412 pixels
[Sun Mar 18 10:53:21 2012] 31300.960000 total counts/ 8806.860000 bgd. counts: snr = 239.694504
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.180412 pixels
  Position = (287.1, 277.4) = 15 50 54.19 -54 18 23.3
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 22494.1 +/- 176.9
  Background counts = 8806.9
  Rate = 0.5 +/- 0.004
[Sun Mar 18 10:53:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 10:53:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 10:53:21 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 10:53:21 2012] Source does appear to be extended
[Sun Mar 18 10:53:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 12:14:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 12:14:25 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Sun Mar 18 12:14:25 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.892
[Sun Mar 18 12:14:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.80"
[Sun Mar 18 12:35:33 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 12:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 12:35:33 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 12:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 12:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 12:35:33 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 12:35:33 2012] fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 12:35:33 2012] Fit fullrun_mos1_xmm0604880101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 14:27:42 2012] Spatial fit model total counts = 31220.600000, observed total counts = 31209.000000
[Sun Mar 18 14:27:42 2012] Offset between fit and detection position for source 1 = 0.000401 pixels
[Sun Mar 18 14:27:42 2012] 31305.020000 total counts/ 8810.220000 bgd. counts: snr = 239.656250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000401 pixels
  Position = (287.1, 277.4) = 15 50 54.19 -54 18 23.3
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 22494.8 +/- 176.9
  Background counts = 8810.2
  Rate = 0.5 +/- 0.004
[Sun Mar 18 14:27:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:27:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:27:42 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 14:27:42 2012] Source does appear to be extended
[Sun Mar 18 14:27:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 16:56:33 2012] Counts = 22494.800000, rescaling region sizes by 3.000000
[Sun Mar 18 16:56:33 2012] XMMSAS src. selection expression = ellipse(24929.385680, 24083.486200, 1044.293430, 1044.293430, 0.000000, X, Y)
[Sun Mar 18 16:56:33 2012] Writing source region out to fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 18 16:56:33 2012] Extracting stamp from image fullrun_mos1_xmm0604880101_pi300-10000_cl_sm2.00.img.gz, (227, 217) - (347, 337)
[Sun Mar 18 16:56:33 2012] XMMSAS bgd. selection expression = annulus(24929.385680, 24083.486200, 5221.467150, 10442.934300, X, Y) && !ellipse(14993.334839, 26311.430023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35892.966125, 26389.437439, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 16:56:33 2012] Writing fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1.gif
[Sun Mar 18 16:56:47 2012] Mean detx,y = (324.49, -213.58) 
[Sun Mar 18 16:56:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 17:03:25 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 17:03:25 2012] Setting source spectrum file to fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 17:03:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 18 18:08:33 2012] Updating aperture counts using extracted products
[Sun Mar 18 18:08:33 2012] Error reading totcts from fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 18:08:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:08:33 2012] Using photon index=1.80, rate=0.505, arf fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 18:08:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:08:34 2012] Updating source flux to 4.7e-12
[Sun Mar 18 18:09:32 2012] Reading fit data from xmm0604880101/analysis//spectral/fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 18 18:09:32 2012] Spectral fit parameter nH value = 4.84735e+22
[Sun Mar 18 18:09:32 2012] Spectral fit parameter PhoIndex value = 3.47545
[Sun Mar 18 18:09:32 2012] Failed to get F(0.3-8.0) from xmm0604880101/analysis//spectral/fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 18 18:09:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 18:09:32 2012] Using Nh = 4.8e+22, photon index=3.48, rate=0.505, arf fullrun_mos1_xmm0604880101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 18:09:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 18:09:32 2012] Updating source flux to 8.3e-12