[Fri Nov 25 11:19:56 2011] Detection parameters:
  Position = (363.5, 267.8) = 23 27 5.99 -53 31 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.3 +/- 6.9
  Background counts = 2.2
  Rate = 0.0003 +/- 7e-05

[Fri Nov 25 11:19:56 2011] Off-axis axis estimate = 5.21'
[Fri Nov 25 12:26:52 2011] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 12:26:52 2011] Initial guess for spatial extent in simple fitting = 9.03"
[Fri Nov 25 12:26:52 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.941
[Fri Nov 25 12:26:52 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 9.03"
[Fri Nov 25 12:51:08 2011] fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_src7.ximg exists
[Fri Nov 25 12:51:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_src7.csv
[Fri Nov 25 12:51:08 2011] fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Nov 25 12:51:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_src7.csv
[Fri Nov 25 12:51:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 12:51:08 2011] fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Nov 25 12:51:08 2011] fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Nov 25 12:51:08 2011] Fit fullrun_mos1_xmm0604873401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Nov 25 12:54:04 2011] Spatial fit model total counts = 49.090500, observed total counts = 52.000000
[Fri Nov 25 12:54:04 2011] Offset between fit and detection position for source 6 = 1.509042 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.509042 pixels
  Position = (364.1, 266.5) = 23 27 5.68 -53 32 4.4
  Extent = 11.5 (8.5-13.6)", rotation angle = 0
  Source counts = 50.7 +/- 7.1
  Background counts = 0.0
  Rate = 0.0005 +/- 7e-05
 Deleting source due to low signal-to-noise ratio