[Wed Mar 14 09:32:52 2012] Detection parameters:
  Position = (151.2, 468.5) = 23 40 34.27 -53 39 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.5 +/- 8.8
  Background counts = 9.6
  Rate = 0.0004 +/- 9e-05

[Wed Mar 14 09:32:52 2012] Off-axis axis estimate = 16.31'
[Wed Mar 14 10:48:11 2012] Using EEF radius (= 14.59 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 10:48:11 2012] Initial guess for spatial extent in simple fitting = 14.59"
[Wed Mar 14 10:48:11 2012] source mask rpix=3.4, npix_max = 59, mask sum = 55, frac = 0.926
[Wed Mar 14 10:48:11 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 14.59"
[Wed Mar 14 11:16:58 2012] fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Mar 14 11:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_src2.csv
[Wed Mar 14 11:16:58 2012] fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Mar 14 11:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_src2.csv
[Wed Mar 14 11:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 11:16:58 2012] fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Mar 14 11:16:58 2012] fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Mar 14 11:16:58 2012] Fit fullrun_mos1_xmm0604870301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Mar 14 11:55:24 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.459432 pixels away
[Wed Mar 14 11:55:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 11:55:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 11:55:24 2012] Assessing source extent using major
[Wed Mar 14 11:55:24 2012] Source does appear to be extended
[Wed Mar 14 11:55:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 12:57:03 2012] Using EEF radius (= 14.59 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 12:57:03 2012] Initial guess for spatial extent in simple fitting = 14.59"
[Wed Mar 14 12:57:03 2012] source mask rpix=3.4, npix_max = 59, mask sum = 55, frac = 0.926
[Wed Mar 14 12:57:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.59"
[Wed Mar 14 13:21:45 2012] fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 14 13:21:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_src1.csv
[Wed Mar 14 13:21:45 2012] fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 14 13:21:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_src1.csv
[Wed Mar 14 13:21:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 13:21:45 2012] fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 14 13:21:45 2012] fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 14 13:21:45 2012] Fit fullrun_mos1_xmm0604870301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 14 13:57:30 2012] Spatial fit model total counts = 67.972600, observed total counts = 70.000000
[Wed Mar 14 13:57:30 2012] Offset between fit and detection position for source 4 = 0.743005 pixels
[Wed Mar 14 13:57:30 2012] 67.964300 total counts/ 54.206200 bgd. counts: snr = 1.868676
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.743005 pixels
  Position = (150.5, 468.2) = 23 40 34.59 -53 39 32.2
  Extent = 9.6 (3.6-16.1)", rotation angle = 0
  Source counts = 13.8 +/- 8.2
  Background counts = 54.2
  Rate = 0.0002 +/- 9e-05
[Wed Mar 14 13:57:30 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 13:57:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 13:57:30 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 13:57:30 2012] Source does appear to be extended
[Wed Mar 14 13:57:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 15:29:04 2012] XMMSAS src. selection expression = ellipse(13045.604758, 40683.942600, 574.476617, 574.476617, 0.000000, X, Y)
[Wed Mar 14 15:29:04 2012] Writing source region out to fullrun_mos1_xmm0604870301_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 14 15:29:04 2012] Extracting stamp from image fullrun_mos1_xmm0604870301_pi300-10000_cl_sm2.00.img.gz, (117, 435) - (184, 501)
[Wed Mar 14 15:29:04 2012] XMMSAS bgd. selection expression = annulus(13045.604758, 40683.942600, 957.461028, 1914.922055, X, Y)
[Wed Mar 14 15:29:04 2012] Writing fullrun_mos1_xmm0604870301_pi300-10000_pass1_cl_src4.gif
[Wed Mar 14 15:31:59 2012] Mean detx,y = (4098.04, 431.25) 
[Wed Mar 14 15:32:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 15:32:09 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 15:32:10 2012] Setting source spectrum file to fullrun_mos1_xmm0604870301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 14 15:32:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604870301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar 14 15:38:33 2012] Not generating rmf since there are only 13 counts
[Wed Mar 14 15:38:33 2012] rmf not generated due to insufficient counts
[Wed Mar 14 15:57:31 2012] Updating aperture counts using extracted products
[Wed Mar 14 15:57:31 2012] Error reading totcts from fullrun_mos1_xmm0604870301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 14 15:57:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 15:57:32 2012] Using photon index=1.80, rate=0.000156, arf fullrun_mos1_xmm0604870301_pi300-10000_pass1_cl_src4.arf
[Wed Mar 14 15:57:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 15:57:32 2012] Getting flux using calc_pl_flux failed
[Wed Mar 14 15:57:38 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Mar 14 15:57:39 2012] xmm0604870301/analysis//spectral/fullrun_mos1_xmm0604870301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete