[Sun May 27 09:09:46 2012] Detection parameters:
  Position = (216.1, 187.1) = 18 14 44.07 -32 56 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.3 +/- 17.0
  Background counts = 70.0
  Rate = 0.0008 +/- 0.0001

[Sun May 27 09:09:46 2012] Off-axis axis estimate = 10.04'
[Sun May 27 12:39:15 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun May 27 12:39:15 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun May 27 12:39:15 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Sun May 27 12:39:15 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 11.45"
[Sun May 27 13:43:34 2012] fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_src41.ximg exists
[Sun May 27 13:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_src41.csv
[Sun May 27 13:43:34 2012] fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun May 27 13:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_src41.csv
[Sun May 27 13:43:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 13:43:35 2012] fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun May 27 13:43:35 2012] fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun May 27 13:43:35 2012] Fit fullrun_mos2_xmm0604860401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun May 27 13:44:06 2012] Warning, spatial fit 41 centroid is now closest to src. 4
[Sun May 27 13:44:06 2012] Vigneting correction estimate = 1.000000
[Sun May 27 13:44:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 13:44:06 2012] Assessing source extent using major
[Sun May 27 13:44:06 2012] Source does appear to be extended
[Sun May 27 13:44:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 16:34:07 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:34:07 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun May 27 16:34:07 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Sun May 27 16:34:07 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 11.45"
[Sun May 27 17:29:57 2012] fullrun_mos2_xmm0604860401_pi300-10000_cl_pass1_src40.ximg exists
[Sun May 27 17:29:57 2012] fullrun_mos2_xmm0604860401_pi300-10000_cl_pass1_src40_1.ximg exists
[Sun May 27 17:29:57 2012] Fit fullrun_mos2_xmm0604860401_pi300-10000_cl_pass1_src40 appears to have run properly
[Sun May 27 17:29:58 2012] fullrun_mos2_xmm0604860401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sun May 27 17:29:58 2012] fullrun_mos2_xmm0604860401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sun May 27 17:29:58 2012] Fit fullrun_mos2_xmm0604860401_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Sun May 27 17:30:26 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 14.371307 pixels away
[Sun May 27 17:30:26 2012] Vigneting correction estimate = 1.000000
[Sun May 27 17:30:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 17:30:26 2012] Assessing source extent using major
[Sun May 27 17:30:26 2012] Source does appear to be extended
[Sun May 27 17:30:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 22:14:36 2012] XMMSAS src. selection expression = ellipse(18752.391693, 16233.362289, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 22:14:36 2012] Writing source region out to fullrun_mos2_xmm0604860401_pi300-10000_pass1_cl_src49_src.reg
[Sun May 27 22:14:36 2012] Extracting stamp from image fullrun_mos2_xmm0604860401_pi300-10000_cl_sm2.00.img.gz, (179, 150) - (254, 225)
[Sun May 27 22:14:36 2012] XMMSAS bgd. selection expression = annulus(18752.391693, 16233.362289, 1087.500000, 2175.000000, X, Y) && !ellipse(20335.419724, 15332.468369, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 22:14:36 2012] Writing fullrun_mos2_xmm0604860401_pi300-10000_pass1_cl_src49.gif
[Sun May 27 22:31:52 2012] Mean detx,y = (7882.42, -11659.75) 
[Sun May 27 22:31:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 22:31:59 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 22:31:59 2012] Setting source spectrum file to fullrun_mos2_xmm0604860401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun May 27 22:31:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604860401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sun May 27 23:15:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 23:15:53 2012] rmf not generated due to insufficient counts
[Sun May 27 23:19:05 2012] Updating aperture counts using extracted products
[Sun May 27 23:19:05 2012] Error reading totcts from fullrun_mos2_xmm0604860401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun May 27 23:19:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:19:05 2012] Using photon index=1.80, rate=0.000845, arf fullrun_mos2_xmm0604860401_pi300-10000_pass1_cl_src49.arf
[Sun May 27 23:19:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:19:05 2012] Updating source flux to 2.1e-14
[Sun May 27 23:19:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting