[Wed Jun 12 12:53:14 2013] Detection parameters:
  Position = (307.6, 189.0) = 18 14 12.39 -32 56 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.5 +/- 32.7
  Background counts = 319.8
  Rate = 0.002 +/- 0.0003

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 7.96'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 10.41"
[Wed Jun 12 12:53:57 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.896
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 10.41"
[Wed Jun 12 12:53:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src88.ximg exists
[Wed Jun 12 12:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src88.csv
[Wed Jun 12 12:53:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src88_1.ximg exists
[Wed Jun 12 12:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src88.csv
[Wed Jun 12 12:53:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Wed Jun 12 12:54:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Wed Jun 12 12:54:01 2013] Fit fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Wed Jun 12 12:54:25 2013] Warning, spatial fit 88 centroid is now closest to src. 90
[Wed Jun 12 12:54:25 2013] Spatial fit model total counts = 2777.750000, observed total counts = 2721.000000
[Wed Jun 12 12:54:25 2013] Offset between fit and detection position for source 92 = 2.417607 pixels
[Wed Jun 12 12:54:25 2013] Warning, changing simple spatial fit ID from 88 to 91
[Wed Jun 12 12:54:25 2013] 2481.204000 total counts/ 1959.690000 bgd. counts: snr = 11.780732
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 2.417607 pixels
  Position = (307.3, 186.6) = 18 14 12.48 -32 56 57.0
  Extent = 12.4" x 12.4", rotation angle = 0
  Source counts = 521.5 +/- 49.8
  Background counts = 1959.7
  Rate = 0.005 +/- 0.0005
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:25 2013] Source is confused with source 95
[Wed Jun 12 12:54:25 2013] Source is confused with source 96
[Wed Jun 12 12:54:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 12.37"
[Wed Jun 12 12:54:56 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.096
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 12.37"
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src80.ximg exists
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src80_1.ximg exists
[Wed Jun 12 12:55:00 2013] Fit fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src80 appears to have run properly
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Wed Jun 12 12:55:01 2013] Fit fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Wed Jun 12 12:55:19 2013] Warning, spatial fit 80 centroid is now closest to src. 90
[Wed Jun 12 12:55:19 2013] Spatial fit model total counts = 2794.260000, observed total counts = 2721.000000
[Wed Jun 12 12:55:19 2013] Offset between fit and detection position for source 92 = 0.259361 pixels
[Wed Jun 12 12:55:19 2013] Warning, changing simple spatial fit ID from 80 to 83
[Wed Jun 12 12:55:19 2013] 2649.707000 total counts/ 2072.060000 bgd. counts: snr = 12.689992
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 0.259361 pixels
  Position = (307.6, 186.6) = 18 14 12.39 -32 56 57.2
  Extent = 27.9" x 5.7", rotation angle = 93
  Source counts = 577.6 +/- 51.5
  Background counts = 2072.1
  Rate = 0.005 +/- 0.0005
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 4.90
[Wed Jun 12 12:55:19 2013] Source is asymmetric
[Wed Jun 12 12:55:46 2013] XMMSAS src. selection expression = ellipse(26711.396299, 16181.948669, 1676.364048, 342.040908, 93.346654, X, Y)
[Wed Jun 12 12:55:46 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src92_src.reg
[Wed Jun 12 12:55:46 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (211, 90) - (404, 283)
[Wed Jun 12 12:55:46 2013] XMMSAS bgd. selection expression = annulus(26711.396299, 16181.948669, 2793.940080, 5587.880161, X, Y) && !ellipse(30032.044708, 15735.099579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20349.758209, 15273.598404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26512.683800, 14228.409600, 759.180022, 684.703220, 292.268000, X, Y) && !ellipse(26911.415113, 20949.433484, 566.240783, 399.166176, 90.893166, X, Y) && !ellipse(26582.535065, 13519.574539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22953.293213, 14305.220276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.391724, 19076.055695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.170685, 16749.515915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22929.982056, 16182.012695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26973.112760, 22338.105405, 1273.648037, 331.823794, 93.804681, X, Y) && !ellipse(26959.922800, 22172.886000, 766.844822, 766.844822, 0.000000, X, Y) && !ellipse(26909.651400, 20906.702000, 1406.808040, 359.086410, 90.000000, X, Y) && !ellipse(31233.519806, 20311.219131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26859.085571, 20320.992294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30917.480000, 20113.703800, 1535.056044, 836.128024, 319.589000, X, Y) && !ellipse(26864.031200, 19699.079216, 813.976023, 813.976023, 0.000000, X, Y) && !ellipse(26849.448600, 18855.608000, 749.189622, 749.189622, 0.000000, X, Y) && !ellipse(30816.313812, 18580.317917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26779.211670, 18138.207748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23423.828125, 17828.190598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.371002, 17353.126205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21963.264960, 16285.301400, 530.988015, 530.988015, 0.000000, X, Y) && !ellipse(31952.573425, 16147.243759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26685.943400, 15687.610000, 2235.152064, 422.748012, 93.419980, X, Y) && !ellipse(26665.828600, 15397.577600, 1746.144050, 489.008014, 92.171350, X, Y)
[Wed Jun 12 12:55:46 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src92.gif
[Wed Jun 12 13:09:41 2013] Mean detx,y = (159.41, 11166.55) 
[Wed Jun 12 13:09:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 13:10:39 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 13:10:40 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Wed Jun 12 13:10:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Wed Jun 12 15:12:33 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:33 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src92_src_b10.pi.gz = 3272.00
[Wed Jun 12 15:12:33 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src92_bgd.pi.gz = 34262.00
[Wed Jun 12 15:12:33 2013] Got source and background scale factors 1760222.000000, 26077413.000000
[Wed Jun 12 15:12:33 2013] User source parameters:
  Position = (307.6, 186.6) = 18 14 12.39 -32 56 57.2
  Extent = 27.9" x 5.7", rotation angle = 93
  Source aperture counts = 959.3 +/- 58.2
  Background aperture counts = 2312.7
  Rate = 0.009 +/- 0.0005

[Wed Jun 12 15:12:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:35 2013] Using photon index=1.80, rate=0.00544, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src92.arf
[Wed Jun 12 15:12:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:35 2013] Updating source flux to 3.7e-14
[Wed Jun 12 15:12:54 2013] Flag c found in src. 92 procflags, skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src92_pl.csv not found, spectral fit skipped or did not complete