[Wed Jun 12 12:53:13 2013] Detection parameters:
  Position = (415.1, 292.0) = 18 13 35.28 -32 49 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.6 +/- 28.1
  Background counts = 342.1
  Rate = 0.002 +/- 0.0004

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 8.47'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Wed Jun 12 12:53:57 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 10.67"
[Wed Jun 12 12:53:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src57.ximg exists
[Wed Jun 12 12:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src57.csv
[Wed Jun 12 12:53:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src57_1.ximg exists
[Wed Jun 12 12:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src57.csv
[Wed Jun 12 12:53:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Wed Jun 12 12:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src57.csv
[Wed Jun 12 12:54:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Wed Jun 12 12:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src57.csv
[Wed Jun 12 12:54:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Source 60 is offset by -0.008350 and 4.235768 pixels which is larger than
2 X fitted extent = 0.861908 x 0.861908, not incorporating fit results
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Wed Jun 12 12:54:56 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 10.67"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src54.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src54.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src54_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src54.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Wed Jun 12 12:55:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src54.csv
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Wed Jun 12 12:55:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src54.csv
[Wed Jun 12 12:55:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 13.057150 pixels away
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:45 2013] XMMSAS src. selection expression = ellipse(36067.783875, 25351.899780, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_src.reg
[Wed Jun 12 12:55:45 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (378, 254) - (453, 329)
[Wed Jun 12 12:55:45 2013] XMMSAS bgd. selection expression = annulus(36067.783875, 25351.899780, 1087.500000, 2175.000000, X, Y) && !ellipse(35836.453827, 22552.909485, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60.gif
[Wed Jun 12 12:56:11 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_bgd.evt exist, delete to re-create
[Wed Jun 12 12:56:11 2013] Mean detx,y = (9179.78, 1589.11) 
[Wed Jun 12 12:56:11 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_bgd.img exist, delete to re-create
[Wed Jun 12 12:56:11 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_bgd.pi exist, delete to re-create
[Wed Jun 12 12:56:11 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jun 12 12:56:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed Jun 12 12:56:11 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_bgd.lc exist, delete to re-create
[Wed Jun 12 14:28:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 14:28:23 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:29 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:29 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 1506.00
[Wed Jun 12 15:12:29 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_bgd.pi.gz = 11495.00
[Wed Jun 12 15:12:29 2013] Got source and background scale factors 1221656.000000, 9754266.000000
[Wed Jun 12 15:12:29 2013] User source parameters:
  Position = (415.1, 292.0) = 18 13 35.28 -32 49 19.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 66.3 +/- 39.8
  Background aperture counts = 1439.7
  Rate = 0.0006 +/- 0.0004

[Wed Jun 12 15:12:29 2013] Updating counts from extracted products
[Wed Jun 12 15:12:29 2013] Set source signif. to 66.33/37.94 = 1.75
[Wed Jun 12 15:12:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:35 2013] Using photon index=1.80, rate=0.000625, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60.arf
[Wed Jun 12 15:12:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:35 2013] Updating source flux to 3.3e-15
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete