[Wed Jun 12 12:53:13 2013] Detection parameters:
  Position = (274.5, 320.4) = 18 14 23.80 -32 47 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.8 +/- 28.6
  Background counts = 380.7
  Rate = 0.002 +/- 0.0003

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 2.35'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 7.60"
[Wed Jun 12 12:53:57 2013] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.237
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 7.60"
[Wed Jun 12 12:53:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src53.ximg exists
[Wed Jun 12 12:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src53.csv
[Wed Jun 12 12:53:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed Jun 12 12:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src53.csv
[Wed Jun 12 12:53:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed Jun 12 12:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src53.csv
[Wed Jun 12 12:54:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed Jun 12 12:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src53.csv
[Wed Jun 12 12:54:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Warning, spatial fit 53 centroid is now closest to src. 55
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 7.60"
[Wed Jun 12 12:54:56 2013] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.237
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 7.60"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src50.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src50.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src50_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src50.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Wed Jun 12 12:55:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src50.csv
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Wed Jun 12 12:55:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src50.csv
[Wed Jun 12 12:55:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Source 56 is offset by 5.950728 and 0.814296 pixels which is larger than
2 X fitted extent = 1.024290 x 1.024290, not incorporating fit results
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:45 2013] XMMSAS src. selection expression = ellipse(23835.129333, 27822.415161, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_src.reg
[Wed Jun 12 12:55:45 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (237, 283) - (312, 358)
[Wed Jun 12 12:55:45 2013] XMMSAS bgd. selection expression = annulus(23835.129333, 27822.415161, 1087.500000, 2175.000000, X, Y) && !ellipse(27196.310180, 27431.783600, 1388.580040, 1388.580040, 0.000000, X, Y) && !ellipse(24093.997345, 29048.621857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.967407, 28903.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22669.441376, 28221.067810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22620.318024, 25921.345154, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56.gif
[Wed Jun 12 12:56:09 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_bgd.evt exist, delete to re-create
[Wed Jun 12 12:56:10 2013] Mean detx,y = (-3155.28, -385.24) 
[Wed Jun 12 12:56:10 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_bgd.img exist, delete to re-create
[Wed Jun 12 12:56:10 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_bgd.pi exist, delete to re-create
[Wed Jun 12 12:56:10 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Jun 12 12:56:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Wed Jun 12 12:56:10 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_bgd.lc exist, delete to re-create
[Wed Jun 12 14:27:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 14:27:22 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:29 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:29 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 1970.00
[Wed Jun 12 15:12:29 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_bgd.pi.gz = 7717.00
[Wed Jun 12 15:12:29 2013] Got source and background scale factors 1191826.000000, 5586343.000000
[Wed Jun 12 15:12:29 2013] User source parameters:
  Position = (274.5, 320.4) = 18 14 23.80 -32 47 12.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 323.6 +/- 45.4
  Background aperture counts = 1646.4
  Rate = 0.003 +/- 0.0004

[Wed Jun 12 15:12:29 2013] Updating counts from extracted products
[Wed Jun 12 15:12:29 2013] Set source signif. to 323.61/40.58 = 7.98
[Wed Jun 12 15:12:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:35 2013] Using photon index=1.80, rate=0.00305, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56.arf
[Wed Jun 12 15:12:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:35 2013] Updating source flux to 1.3e-14
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete