[Wed Jun 12 12:53:13 2013] Detection parameters:
  Position = (261.1, 324.9) = 18 14 28.42 -32 46 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 460.1 +/- 34.0
  Background counts = 370.3
  Rate = 0.006 +/- 0.0004

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 3.32'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Wed Jun 12 12:53:57 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.719
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 8.09"
[Wed Jun 12 12:53:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src52.ximg exists
[Wed Jun 12 12:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src52.csv
[Wed Jun 12 12:53:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src52_1.ximg exists
[Wed Jun 12 12:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src52.csv
[Wed Jun 12 12:53:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Wed Jun 12 12:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src52.csv
[Wed Jun 12 12:54:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Wed Jun 12 12:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src52.csv
[Wed Jun 12 12:54:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Source 55 is offset by -5.094043 and -8.499267 pixels which is larger than
2 X fitted extent = 0.929605 x 0.929605, not incorporating fit results
[Wed Jun 12 12:54:25 2013] Source 55 is offset by -3.133800 and -5.802876 pixels which is larger than
2 X fitted extent = 1.217554 x 9.737409, not incorporating fit results
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Wed Jun 12 12:54:56 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.719
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 8.09"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src49.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src49.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src49_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src49.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Wed Jun 12 12:55:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src49.csv
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Wed Jun 12 12:55:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src49.csv
[Wed Jun 12 12:55:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Source 55 is offset by 7.118361 and 5.930159 pixels which is larger than
2 X fitted extent = 0.874074 x 0.874074, not incorporating fit results
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:45 2013] XMMSAS src. selection expression = ellipse(22669.441376, 28221.067810, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_src.reg
[Wed Jun 12 12:55:45 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (224, 287) - (299, 362)
[Wed Jun 12 12:55:45 2013] XMMSAS bgd. selection expression = annulus(22669.441376, 28221.067810, 1087.500000, 2175.000000, X, Y) && !ellipse(24093.997345, 29048.621857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20546.013992, 29791.745972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23835.129333, 27822.415161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22620.318024, 25921.345154, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55.gif
[Wed Jun 12 12:56:09 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_bgd.evt exist, delete to re-create
[Wed Jun 12 12:56:09 2013] Mean detx,y = (-4440.98, -614.67) 
[Wed Jun 12 12:56:09 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_bgd.img exist, delete to re-create
[Wed Jun 12 12:56:09 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_bgd.pi exist, delete to re-create
[Wed Jun 12 12:56:09 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed Jun 12 12:56:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Wed Jun 12 12:56:09 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_bgd.lc exist, delete to re-create
[Wed Jun 12 14:26:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 14:26:54 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:28 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:28 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 1558.00
[Wed Jun 12 15:12:28 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_bgd.pi.gz = 7625.00
[Wed Jun 12 15:12:28 2013] Got source and background scale factors 1019761.000000, 6273663.000000
[Wed Jun 12 15:12:29 2013] User source parameters:
  Position = (261.1, 324.9) = 18 14 28.42 -32 46 52.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 318.6 +/- 40.5
  Background aperture counts = 1239.4
  Rate = 0.003 +/- 0.0004

[Wed Jun 12 15:12:29 2013] Updating counts from extracted products
[Wed Jun 12 15:12:29 2013] Set source signif. to 318.58/35.21 = 9.05
[Wed Jun 12 15:12:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:35 2013] Using photon index=1.80, rate=0.003, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55.arf
[Wed Jun 12 15:12:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:35 2013] Updating source flux to 1.5e-14
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete