[Wed Jun 12 12:53:13 2013] Detection parameters:
  Position = (312.0, 331.9) = 18 14 10.88 -32 46 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.6 +/- 29.2
  Background counts = 400.4
  Rate = 0.003 +/- 0.0004

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 2.62'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Wed Jun 12 12:53:57 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 7.74"
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src50.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src50.csv
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src50.csv
[Wed Jun 12 12:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed Jun 12 12:54:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Source 53 is offset by 0.848838 and 6.019078 pixels which is larger than
2 X fitted extent = 5.225977 x 5.225977, not incorporating fit results
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Wed Jun 12 12:54:56 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 7.74"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src47.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src47.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src47_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src47.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Wed Jun 12 12:55:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src47.csv
[Wed Jun 12 12:55:01 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Wed Jun 12 12:55:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src47.csv
[Wed Jun 12 12:55:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Source 53 is offset by 0.736493 and 5.977400 pixels which is larger than
2 X fitted extent = 7.073012 x 5.282025, not incorporating fit results
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:45 2013] XMMSAS src. selection expression = ellipse(27093.052063, 28827.181793, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_src.reg
[Wed Jun 12 12:55:45 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (274, 294) - (349, 369)
[Wed Jun 12 12:55:45 2013] XMMSAS bgd. selection expression = annulus(27093.052063, 28827.181793, 1087.500000, 2175.000000, X, Y) && !ellipse(27196.310180, 27431.783600, 1388.580040, 1388.580040, 0.000000, X, Y) && !ellipse(24093.997345, 29048.621857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.006775, 31776.351166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.967407, 28903.320068, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53.gif
[Wed Jun 12 12:56:08 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_bgd.evt exist, delete to re-create
[Wed Jun 12 12:56:08 2013] Mean detx,y = (-22.44, -1449.70) 
[Wed Jun 12 12:56:08 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_bgd.img exist, delete to re-create
[Wed Jun 12 12:56:08 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_bgd.pi exist, delete to re-create
[Wed Jun 12 12:56:08 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Wed Jun 12 12:56:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Wed Jun 12 12:56:08 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_bgd.lc exist, delete to re-create
[Wed Jun 12 14:21:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 14:21:52 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:28 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:28 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 2562.00
[Wed Jun 12 15:12:28 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_bgd.pi.gz = 9893.00
[Wed Jun 12 15:12:28 2013] Got source and background scale factors 1022018.000000, 6438674.000000
[Wed Jun 12 15:12:28 2013] User source parameters:
  Position = (312.0, 331.9) = 18 14 10.88 -32 46 35.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 991.7 +/- 51.6
  Background aperture counts = 1570.3
  Rate = 0.009 +/- 0.0005

[Wed Jun 12 15:12:28 2013] Updating counts from extracted products
[Wed Jun 12 15:12:28 2013] Set source signif. to 991.67/39.63 = 25.02
[Wed Jun 12 15:12:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:35 2013] Using photon index=1.80, rate=0.00934, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53.arf
[Wed Jun 12 15:12:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:35 2013] Updating source flux to 3.6e-14
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete