[Wed Jun 12 12:53:12 2013] Detection parameters:
  Position = (224.1, 436.3) = 18 14 41.14 -32 38 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.9 +/- 23.8
  Background counts = 255.2
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 11.35'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Wed Jun 12 12:53:57 2013] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.812
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 12.10"
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src45.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src45.csv
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src45.csv
[Wed Jun 12 12:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed Jun 12 12:54:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 15.469562 pixels away
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Wed Jun 12 12:54:56 2013] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.812
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 12.10"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src43.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src43.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src43_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src43.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src43.csv
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src43.csv
[Wed Jun 12 12:55:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 15.469562 pixels away
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:45 2013] XMMSAS src. selection expression = ellipse(19450.912643, 37907.015594, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_src.reg
[Wed Jun 12 12:55:45 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (187, 399) - (262, 474)
[Wed Jun 12 12:55:45 2013] XMMSAS bgd. selection expression = annulus(19450.912643, 37907.015594, 1087.500000, 2175.000000, X, Y) && !ellipse(22312.682434, 38578.727386, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47.gif
[Wed Jun 12 12:56:06 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create
[Wed Jun 12 12:56:06 2013] Mean detx,y = (-8249.60, -10216.07) 
[Wed Jun 12 12:56:06 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create
[Wed Jun 12 12:56:06 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create
[Wed Jun 12 12:56:06 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed Jun 12 12:56:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Wed Jun 12 12:56:06 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create
[Wed Jun 12 14:18:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 14:18:02 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:27 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:27 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 832.00
[Wed Jun 12 15:12:27 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_bgd.pi.gz = 9234.00
[Wed Jun 12 15:12:27 2013] Got source and background scale factors 877689.000000, 9698417.000000
[Wed Jun 12 15:12:27 2013] User source parameters:
  Position = (224.1, 436.3) = 18 14 41.14 -32 38 47.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -3.7 +/- 29.9
  Background aperture counts = 835.7
  Rate = -3e-05 +/- 0.0003

[Wed Jun 12 15:12:27 2013] Updating counts from extracted products
[Wed Jun 12 15:12:27 2013] Set source signif. to -3.66/28.91 = -0.13
[Wed Jun 12 15:12:34 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:34 2013] Using photon index=1.80, rate=-3.45e-05, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47.arf
[Wed Jun 12 15:12:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:34 2013] Updated flux is not positive, keeping original flux
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete