[Wed Jun 12 12:53:12 2013] Detection parameters:
  Position = (412.5, 259.8) = 18 13 36.18 -32 51 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 428.1 +/- 32.3
  Background counts = 330.1
  Rate = 0.007 +/- 0.0005

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 8.73'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 10.79"
[Wed Jun 12 12:53:57 2013] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.759
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 10.79"
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src32.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src32.csv
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src32.csv
[Wed Jun 12 12:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed Jun 12 12:54:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Source 34 is offset by 4.809906 and 8.711189 pixels which is larger than
2 X fitted extent = 1.240607 x 1.240607, not incorporating fit results
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 10.79"
[Wed Jun 12 12:54:56 2013] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.759
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 10.79"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src31.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src31.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src31.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed Jun 12 12:55:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.609867 pixels away
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:45 2013] XMMSAS src. selection expression = ellipse(35836.453827, 22552.909485, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_src.reg
[Wed Jun 12 12:55:45 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (375, 222) - (450, 297)
[Wed Jun 12 12:55:45 2013] XMMSAS bgd. selection expression = annulus(35836.453827, 22552.909485, 1087.500000, 2175.000000, X, Y) && !ellipse(36067.783875, 25351.899780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35853.395569, 19934.820938, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34.gif
[Wed Jun 12 12:56:00 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_bgd.evt exist, delete to re-create
[Wed Jun 12 12:56:00 2013] Mean detx,y = (9082.38, 4385.85) 
[Wed Jun 12 12:56:00 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_bgd.img exist, delete to re-create
[Wed Jun 12 12:56:00 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_bgd.pi exist, delete to re-create
[Wed Jun 12 12:56:00 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Jun 12 12:56:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed Jun 12 12:56:00 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_bgd.lc exist, delete to re-create
[Wed Jun 12 14:07:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 14:07:22 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:26 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:26 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 1524.00
[Wed Jun 12 15:12:26 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_bgd.pi.gz = 10301.00
[Wed Jun 12 15:12:26 2013] Got source and background scale factors 1164780.000000, 9293491.000000
[Wed Jun 12 15:12:26 2013] User source parameters:
  Position = (412.5, 259.8) = 18 13 36.18 -32 51 38.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 232.9 +/- 40.0
  Background aperture counts = 1291.1
  Rate = 0.002 +/- 0.0004

[Wed Jun 12 15:12:26 2013] Updating counts from extracted products
[Wed Jun 12 15:12:26 2013] Set source signif. to 232.95/35.93 = 6.48
[Wed Jun 12 15:12:34 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:34 2013] Using photon index=1.80, rate=0.00219, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34.arf
[Wed Jun 12 15:12:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:34 2013] Updating source flux to 1.3e-14
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete