[Wed Jun 12 12:53:12 2013] Detection parameters:
  Position = (264.4, 165.0) = 18 14 27.32 -32 58 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 271.9 +/- 29.1
  Background counts = 297.9
  Rate = 0.002 +/- 0.0002

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 9.99'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 11.42"
[Wed Jun 12 12:53:57 2013] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.768
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 11.42"
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src31.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src31.csv
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src31.csv
[Wed Jun 12 12:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed Jun 12 12:54:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 13.461392 pixels away
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 11.42"
[Wed Jun 12 12:54:56 2013] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.768
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 11.42"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src30.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src30.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src30.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed Jun 12 12:55:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 14.419359 pixels away
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:45 2013] XMMSAS src. selection expression = ellipse(22953.293213, 14305.220276, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:45 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_src.reg
[Wed Jun 12 12:55:45 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (227, 127) - (302, 202)
[Wed Jun 12 12:55:45 2013] XMMSAS bgd. selection expression = annulus(22953.293213, 14305.220276, 1087.500000, 2175.000000, X, Y) && !ellipse(20349.758209, 15273.598404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22929.982056, 16182.012695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.396299, 16181.948669, 2235.152064, 456.054544, 93.346654, X, Y) && !ellipse(21963.264960, 16285.301400, 530.988015, 530.988015, 0.000000, X, Y) && !ellipse(26685.943400, 15687.610000, 2235.152064, 422.748012, 93.419980, X, Y) && !ellipse(26665.828600, 15397.577600, 1746.144050, 489.008014, 92.171350, X, Y)
[Wed Jun 12 12:55:45 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33.gif
[Wed Jun 12 12:55:59 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Wed Jun 12 12:56:00 2013] Mean detx,y = (-3449.23, 13191.94) 
[Wed Jun 12 12:56:00 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Wed Jun 12 12:56:00 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Wed Jun 12 12:56:00 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Jun 12 12:56:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Jun 12 12:56:00 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Wed Jun 12 14:07:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 14:07:07 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:25 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:25 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1262.00
[Wed Jun 12 15:12:26 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_bgd.pi.gz = 5730.00
[Wed Jun 12 15:12:26 2013] Got source and background scale factors 1022001.000000, 4036754.000000
[Wed Jun 12 15:12:26 2013] User source parameters:
  Position = (264.4, 165.0) = 18 14 27.32 -32 58 30.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -188.7 +/- 36.5
  Background aperture counts = 1450.7
  Rate = -0.002 +/- 0.0003

[Wed Jun 12 15:12:26 2013] Updating counts from extracted products
[Wed Jun 12 15:12:26 2013] Set source signif. to -188.69/38.09 = -4.95
[Wed Jun 12 15:12:34 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:34 2013] Using photon index=1.80, rate=-0.00178, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33.arf
[Wed Jun 12 15:12:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:34 2013] Updated flux is not positive, keeping original flux
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete