[Wed Jun 12 12:53:12 2013] Detection parameters:
  Position = (155.7, 338.5) = 18 15 4.76 -32 45 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.0 +/- 30.7
  Background counts = 281.7
  Rate = 0.002 +/- 0.0003

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 10.75'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Wed Jun 12 12:53:57 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 11.80"
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src27.csv
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src27.csv
[Wed Jun 12 12:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed Jun 12 12:54:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 15.417550 pixels away
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Wed Jun 12 12:54:56 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 11.80"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src26.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src26.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src26.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Jun 12 12:55:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 15.404913 pixels away
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:44 2013] XMMSAS src. selection expression = ellipse(13500.779587, 29404.241791, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:44 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_src.reg
[Wed Jun 12 12:55:44 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (118, 301) - (193, 376)
[Wed Jun 12 12:55:44 2013] XMMSAS bgd. selection expression = annulus(13500.779587, 29404.241791, 1087.500000, 2175.000000, X, Y) && !ellipse(15981.123886, 28423.840363, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:44 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29.gif
[Wed Jun 12 12:55:58 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Wed Jun 12 12:55:58 2013] Mean detx,y = (-13666.69, -1542.30) 
[Wed Jun 12 12:55:58 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Wed Jun 12 12:55:58 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Wed Jun 12 12:55:58 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jun 12 12:55:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Jun 12 12:55:58 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Wed Jun 12 13:58:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 13:58:51 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:25 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:25 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1169.00
[Wed Jun 12 15:12:25 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_bgd.pi.gz = 9956.00
[Wed Jun 12 15:12:25 2013] Got source and background scale factors 1054116.000000, 9926541.000000
[Wed Jun 12 15:12:25 2013] User source parameters:
  Position = (155.7, 338.5) = 18 15 4.76 -32 45 54.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 111.8 +/- 35.2
  Background aperture counts = 1057.2
  Rate = 0.001 +/- 0.0003

[Wed Jun 12 15:12:25 2013] Updating counts from extracted products
[Wed Jun 12 15:12:25 2013] Set source signif. to 111.76/32.52 = 3.44
[Wed Jun 12 15:12:34 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:34 2013] Using photon index=1.80, rate=0.00105, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29.arf
[Wed Jun 12 15:12:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:34 2013] Updating source flux to 1.3e-14
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete